牌号简介 About |
---|
Toppyl SP 2103 C是一种为铸造和吹塑薄膜技术开发的裸脚密封剥离解决方案。本产品旨在为聚丙烯基材提供可剥离密封,适用于无菌应用。Toppyl SP 2103 C是一种用于完全替换共挤膜中密封层的溶液。它在宽的密封温度窗口上提供恒定的易开启力,并且在单挤压和共挤结构的常规设备上易于加工。有关本产品的欧盟和FDA合规信息可在单独的产品文档中找到。本产品不适用于医疗和制药应用。 Toppyl SP 2103 C is a barefoot seal peel solution developed for the cast and blown film technology. This product has been designed to offer a peelable seal to PP substrates and is suitable for sterilisable applications. Toppyl SP 2103 C is a solution created to replace completely the sealing layer in a coextruded film. It provides a constant easy-opening force over a wide sealing temperature window and is readily processable on conventional equipment in both mono and co-extruded structures. EU and FDA compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.902 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
6.0 | g/10min | ISO 1133 |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
割线模量 Secant modulus |
|||
2% 正割,MD 2% secant, MD |
260 | MPa | ASTM D882 |
拉伸强度 tensile strength |
ASTM D882 | ||
MD,屈服 MD, yield |
15.0 | MPa | ASTM D882 |
MD,断裂 MD, fracture |
33.0 | MPa | ASTM D882 |
拉伸应变 Tensile strain |
|||
MD,断裂 MD, fracture |
% | ASTM D882 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
鑫达塑料签约1.8亿美元两年期存款
2016-09-02 在美国纳斯达克上市的车用改性塑料生产商中国鑫达塑料有限公司已签约一笔1.8亿美元两年期分期偿还贷款,六家银行参与一般银团贷款。 渣打银行担任牵头行兼簿记行,贷款的最高综合收益为400个基点,利率为伦敦银行间拆放款利率(LIBOR)加码260个基点,平均期限为1.78年。渣打银行还担任额度代理行。 鑫达控股(香港)有限公司是借款人,而中国鑫达及其三家子公司为担保人。 自签约起15个月后开始偿还贷款,分四期不等额偿还:12.5%(1-2)、 25 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |