牌号简介 About |
---|
Adflex Z 108 S是一种反应器TPO(热塑性聚烯烃),采用Lyondellbasell专有的Catalloy工艺技术制造。Adflex Z 108 S具有非常高的柔软度、非常低的弯曲模量和较高的熔体流动速率。它用于注塑、冲击改性、挤出涂层、软复合、薄膜和纤维应用。它也适用于在不改变透明度的情况下对聚丙烯均聚物和无规共聚物进行改性。该等级为天然颗粒形式。有关法规遵从性信息,请参阅Adflex Z 108 S产品管理公告(PSB)。 Adflex Z 108 S is a reactor TPO (thermoplastic polyolefin) manufactured using the proprietary Catalloy process technology from LyondellBasell. Adflex Z 108 S features a very high softness, a very low flexural modulus and a high melt flow rate. It is used by customers for injection molding, impact modification, extrusion coating, soft compounding, film and fiber applications. It is also selected by customers for the modification of polypropylene homopolymer and random copolymer without altering the transparency. The grade is available in natural pellet form. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.890 | g/cm³ | ISO 1183/A |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
27 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ISO 868 | ||
邵氏 A,15 秒 Shore A, 15 seconds |
85 | ISO 868 | |
邵氏 D,15 秒 Shore D, 15 seconds |
30 | ISO 868 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
6.00 | MPa | ISO 527-2 |
屈服 yield |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
屈服 yield |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength 2 |
kN/m | ASTM D624 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180/1A | ||
-40℃ -40℃ |
kJ/m² | ISO 180-1A | |
23℃ 23℃ |
ISO 180/1A | ||
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments 3 |
ASTM D3763 | ||
-40℃,3.20 mm,Energy at Peak Load,Ductile Failure -40℃,3.20 mm,Energy at Peak Load,Ductile Failure |
J | ASTM D3763 | |
23℃,3.20 mm,Energy at Peak Load,Ductile Failure 23℃,3.20 mm,Energy at Peak Load,Ductile Failure |
J | ASTM D3763 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
韧性/脆性转变温度 Toughness/brittle transition temperature |
℃ | ISO 6603-2 | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
60°,3200 µm,注塑成型 60 °, 3200 µ m, injection molding |
ASTM D2457 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 C 模具, 2.0 in/min |
3 7.22 ft/sec |
【新闻资讯】查看全部
佛山顺德农贸市场“限塑”整治 力争消灭违规塑料袋
2017-09-06 顺德区市监局负责人要求各镇街分局通过“疏堵结合”的方式,积极引导市场开办方实行场内塑料购物袋统一采购、销售,同时加大打击场内经营者违规提供超薄塑料购物袋的行为,力争用一年左右的时间,使全区农贸市场基本杜绝销售、使用不合格超薄塑料购物袋的违规现象。 当天,参会人员现场参观了乐从镇东村市场,该市场是实行场内塑料购物袋统一采购、销售的试点市场。记者了解到,该市场由开办方向某塑料袋生产企业统一采购塑料购物袋,然后以成本价销售给场内的经营者;同时,乐从市监分局通过劝诫、督促、责改等方 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |