牌号简介 About |
---|
注射成型应用的均聚物Formolene® 4142N是一种高度等规聚丙烯均聚物,循环时间快,易于脱模。它已用于注塑应用,包括电器,封闭和薄壁程序。它含有独特的稳定剂和添加剂的组合,包括成核和抗静电剂,具有优良的加工性能和良好的最终使用性能。Formolene® 4142N符合21 CFR 177.1520中规定的美国食品药品管理局的所有要求,包括聚烯烃制品和用于直接接触食品的制品的成分的安全使用。 Formolene® 4142N is a homopolymer polypropylene with fast cycle time and easy mold release. It has use in injection molded applications including appliances, closures and thin wall programs. It contains a unique combination of stabilizers and additives, including nucleation and antistat which provides excellent processability and good end use performance. Formolene® 4142N meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. This material is free of animal-derived content. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
12 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
32 | J/m | ASTM D256-A |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,注塑成型 Yield, injection molding 2 |
40.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服,注塑成型 Yield, injection molding 2 |
6.5 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割,注塑成型 1% cut, injection molding 3 |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
塑料占当今汽车的50%,这有助于显着提高燃油效
2017-06-21 较轻的汽车=燃料使用量减少。为了改善帮助我们的环境的燃料效率,汽车制造商正在越来越多地转向强大而轻便的塑料,包括碳纤维增强塑料。 汽车专家估计,现代汽车占塑料的百分 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |