牌号简介 About |
---|
NORDEL™ IP 3430 烃橡胶是一种无定形、二烯含量极低的乙烯-丙烯-二烯三元共聚物 (EPDM),适用于过氧化物固化物品。NORDEL IP 3430 亦可与丁基橡胶共混,以提高其加工性能和硫化性能,应用于汽车和自行车的轮胎内胎材料。 主要特性: 无定形 二烯含量极低 分子量低 耐热稳定以及对紫外线稳定 符合以下法规 美国食品和药物管理局法规21 CFR 177.2600的要求, 美国食品和药物管理局法规21 CFR 177.1520的要求 (参见备注 1), 美国食品和药物管理局法规21 CFR 175.105的要求 (参见备注 2), 美国食品和药物管理局法规21 CFR 177.1210的要求。 请查询法规以获取完备的细节资料。 应用领域: 作为共混组分与丁基橡胶共混,用于轮胎内胎 过氧化物固化模塑部件 备注: (1) 可用于接触所有类型的食品,但油乳液水、高脂肪或者低脂肪食品以及低湿分脂肪和油类食品除外。 (2) 仅限粘合剂。 NORDEL™ IP 3430 Hydrocarbon Rubber is an amorphous, very low diene-containing ethylene-propylene-diene terpolymer (EPDM) and is suitable for peroxide cured articles. NORDEL IP 3430 can also be blended with butyl rubber to improve processing and vulcanizate properties of automotive and bicycle tire innertubes. Main Characteristics: Amorphous Very low diene Low molecular weight Heat and UV stable Complies with U.S. FDA 21 CFR 177.2600, U.S. FDA 21 CFR 177.1520 (See NOTES 1) U.S. FDA 21 CFR 175.105 (See NOTES 2) U.S. FDA 21 CFR 177.1210 Consult the regulations for complete details. Applications: Blend component with butyl rubber in innertubes Peroxide cured molded parts NOTES: (1) Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. (2) Adhesives only. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.860 | g/cm³ | ASTM D297 |
门尼粘度 Mooney viscosity |
|||
ML 1+4,125℃ ML 1+4,125℃ |
27 | MU | ASTM D1646 |
乙烯成份 Ethylene composition |
42.0 | wt% | ASTM D3900 |
亚乙基-降冰片烯含量 Ethylidene norbornene content |
0.8 | wt% | ASTM D6047 |
灰份含量 Ash Content |
< 0.1 | % | ASTM D5667 |
分子量分布 molecular weight distribution |
Internal Method | ||
丙烯含量 Propylene content |
wt% | ASTM D3900 | |
Residual Transition Metal Residual Transition Metal |
ppm | Internal Method | |
挥发物 Volatiles |
wt% | Internal Method |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |