牌号简介 About |
---|
Hostacom TKC 2007N E1 C12507是一种5%滑石填充的聚丙烯共聚物,具有低密度、高温下良好的耐初花性、很好的冲击/刚度平衡、很好的可塑性和优异的耐刮擦性。先进的技术使矿物填料的含量大大降低,这有助于减少最终零件的重量。有关收缩建议,请联系巴塞尔。本产品还提供其他颜色,可根据客户要求开发新颜色。 Hostacom TKC 2007N E1 C12507 is a 5% talc filled PP copolymer, with low density, excellent blooming resistance at elevated temperatures, very good impact/stiffness balance, very good mouldability and excellent scratch resistance. Advanced technologies allowed for a significant reduction of mineral filler content which contributed to the reduction of final part weight. Please contact Basell for shrinkage recommendations. This product is also available in other colors, new colors can be developed depending on customer requirements. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.930 | g/cm³ | ISO 1183/A |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
15 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
19.5 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
屈服,23℃ Yield, 23 ℃ |
5.5 | % | ISO 527-2 |
弯曲模量 Bending modulus 2 |
|||
23℃ 23℃ 2 |
1550 | MPa | ISO 178-A |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
-30℃ -30℃ |
kJ/m² | ||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 |
备注 |
---|
2. 1.0 mm/min |
【新闻资讯】查看全部
朗盛公司一季度业绩表现微弱EBITDA超预期
2016-05-19 5月17日,特殊化学品公司朗盛宣布上调2016财年的业绩预期,预计本财年常规业务范围内息税折旧及摊销前利润(EBITDA)将达到9亿至9.5亿欧元,较此前8.8亿至9.3亿欧元的预期有所上调。 今年一季度,朗盛常规业务范围内EBITDA达到了2.62亿欧元,相比去年该季度的2.29亿欧元,大幅增长约14%。 朗盛管理董事会主席常牧天表示,上调全年财务预期得益于一季度良好的业绩表现,且第二季度开端也很好。据介绍,朗盛一季度业绩表现良好,主要是因为销量的增长,产 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |