公司信息及水印
牌号简介 About |
---|
聚丙烯均聚物。基础树脂符合21 CFR 177.1520(a)(1)(i)和(c)1.1a中规定的美国食品药品监督管理局的要求。佐剂符合各自的FDA法规和21 CFR 177.1520(b)。总之,该树脂符合FDS标准,包括聚烯烃制品和食品接触用制品的成分的安全使用。TSCA注册:CAS_9003-07-0应用:织物、机织物、薄壁模制品的挤压涂层。特点:低领。耐高温、耐针孔、高光泽、表面硬度、耐磨性、优异的防潮性、优异的耐油脂和化学性、低气味和味道。制造:设备。一般挤压或注射成型机和技术。标准加工。 Polypropylene homopolymer.The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(1)(i) and (c)1.1a. The adjuvant meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin meets the FDS criteria covering safe use of polyolefin articles and component of articles intended for food contact use. The base resin also tested and certified compliant with United States Pharmacopoeia (USP) Class VI standard. TSCA Registry: CAS# 9003-07-0 APPLICATIONS: Extrusion coating on fabrics woven, thin walled molded articles. Characteristics: Low neck in. high temperature resistance and good resistance to pinholing, high gloss and surface hardness, abrasion resistance and excellent moisture barrier, excellent grease and chemical resistance and low odor and taste. FABRICATION: Equipment - general extrusion or injection molding machines and techniques - standard processing. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
30 | g/10min | ASTM D1238 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.020 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
32 | J/m | ASTM D256-A |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
90.0 | ℃ | ASTM D648 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
中川001剑指百亿市场 聚氨酯安全套将占五成份额
2017-05-22 2017年5月20日,中国首款水性聚氨酯避孕套―中川001品牌发布会在上海喜玛拉雅艺术中心盛大举行。现场签约金额高达1.31亿元,取得开门红。同时,线上渠道同步开启,联合京东进行全球首发。并签约NBA火箭队,成为官方指定产品,直指百亿避孕套消费市场。 乳胶避孕套向聚氨酯避孕套的转变,是一场跨越式的行业升级 从避孕套发明之初,追求避孕套的薄度成为一个终极命题。天然乳胶避孕套的正常薄度区间是0.04毫米至0.09毫米。有人形象地比作“穿着雨衣洗澡”。中川001水 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |