牌号简介 About |
---|
PA610柔性挤压级。增韧和热稳定。良好的抗氯化锌溶液性能。黑色。适用于管道、型材和电缆护套的挤压。这一等级是部分可再生来源(60%的基础聚合物按重量计)。 PA610 flexible extrusion grade. Toughened and heat stabilized. Good resistance to Zinc Chloride solution. Black colour. Suitable for extrusion of pipes, profiles and cable jackets. This grade is partially renewably-sourced (60% of base polymer by weight). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.01 | g/cm³ | |
吸水率 Water absorption rate |
|||
饱和,23℃,2.00 mm Saturation, 23 ℃, 2.00 mm |
2.2 | % | |
平衡,23℃,50% RH,2.00 mm Equilibrium, 23 ℃, 50% RH, 2.00 mm |
0.90 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
1100 | MPa | |
拉伸强度 tensile strength |
|||
屈服 yield |
30.0 | MPa | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ||
标称拉伸断裂应变 Nominal tensile fracture strain |
% | ||
弯曲模量 Bending modulus 2 |
MPa | ||
弯曲强度 bending strength 2 |
MPa | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ||
维卡软化温度 Vicat Softening Temp |
℃ | ||
熔融温度 Melting temperature 3 |
℃ |
备注 |
---|
2、2.0 mm/min |
3、10°C/min |
【新闻资讯】查看全部
云天化:开发三层复合隔阂工艺
2016-12-30 云天化承担的云南省科技创新强省计划“锂离子电池高性能隔膜制备技术开发及产业化”项目在工艺技术开发及制造装备上取得重大突破,所开发的干法双拉三层复合结构隔膜工艺技术和自主设计的隔膜制造装备,属于国内首创。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |