牌号简介 About |
---|
一种钢填充液态环氧树脂,设计用于维护和/或修理工装、模具制造和调平设备。预期用途:复杂零件的固定装置;填充和调平设备;修补难以达到需要流动环氧树脂的区域;复制或跟踪母版;短期模具和模具产品特点:低粘度、自调平液体浇注、可加工成金属表面的低收缩。 A steel-filled, liquid epoxy designed for maintaining and/or repairing tooling, mold-making, and leveling equipment. Intended Use: Holding fixtures for intricate parts; filling and leveling equipment; repairing hard-to-reach areas where a flowable epoxy is needed; duplicating or tracing masters; short run dies and molds Product features: Low viscosity, self-leveling liquid Castable Low shrinkage Machinable to metallic finish |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.10 | g/cm³ | |
特定体积 Specific volume |
0.473 | cm³/g | |
收缩率 Shrinkage rate |
|||
MD MD |
0.060 | % | ASTM D2566 |
固体含量 Solid content |
|||
by Volume by Volume |
100 | % | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
1.2 | kV/mm | ASTM D149 |
介电常数 Dielectric constant |
ASTM D150 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耐热温度 Heat resistant temperature |
|||
Dry Dry |
℃ | ||
Wet Wet |
℃ | ||
拉伸剪切强度 Tensile shear strength |
MPa | ASTM D1002 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
hr | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
储存稳定性 storage stability |
|||
24 ℃ 24 ℃ |
min | ||
热固性混合粘度 Thermosetting mixed viscosity |
cP |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
伊之密机器人自动化科技(苏州)无限公司榜上有名
2019-01-21 近日,江苏省工信厅公布了2018年江苏省智能制造领军服务机构首批拟认定名单,伊之密机器人自动化科技(苏州)有限公司榜上有名。 据悉,这个认定项目的设立目标,是为适应建设产业转型升级和制造强省目标、培育发展重点产业集群的需要,遴选一批专业服务能力强、能够有效支撑服务江苏智能制造发展的智能制造领军服务机构,实施“菜单式”跟踪培育,促进其尽快做大做强。 到2020年,江苏省培育形成100家左右国内有影响力的智能制造领军服务机构。 < |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |