牌号简介 About |
---|
在颗粒大于1/8“的恶劣使用条件下具有优异耐磨性的氧化铝陶瓷珠填充环氧树脂系统:维修洗涤器、除灰系统、管道弯头、筛网和斜槽;再巡检削片机、料仓、漏斗、料仓、分离器、柴油机工作台;保护排风机、斜槽、洗衣机、HousinG风机、破碎机和破碎机的产品特点:对各种化学品具有优异的抵抗力,工作温度可达300°F,无下垂现象。 Alumina ceramic bead-filled epoxy system with outstanding abrasion resistance for severe service conditions with particulate greater than 1/8" Intended Use: Repair scrubbers, ash handling systems, pipe elbows, screens, and chutes; recontour chippers, bins, hoppers, bunkers, separators, diester tables; protect exhausters, chutes, launderers, housing fans, crushers, and breakers Product Features: Outstanding resistance to a wide range of chemicals Services temperatures to 300°F Non-sagging |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.20 | g/cm³ | |
特定体积 Specific volume |
0.466 | cm³/g | |
收缩率 Shrinkage rate |
|||
MD MD |
0.060 | % | ASTM D2566 |
固体含量 Solid content |
|||
by Volume by Volume |
100 | % | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电常数 Dielectric constant |
41.0 | ASTM D150 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耐热温度 Heat resistant temperature |
|||
Dry Dry |
℃ | ||
Wet Wet |
℃ | ||
拉伸剪切强度 Tensile shear strength |
MPa | ASTM D1002 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
hr | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ||
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
储存稳定性 storage stability |
|||
24 ℃ 24 ℃ |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
国产丁二烯催化剂应用成功!
2021-08-25 搜料网资讯: 2021年8月20日,惠生工程收到久泰能源(准格尔)有限公司的表扬信,由惠生工程授权的丁二烯HS-I催化剂项目一次开车成功;并通过半个月左右的持续优化,在显著降低催 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |