牌号简介 About |
---|
ISPLEN® PB 130 G1F是专为挤出应用而设计的具有中-低流动性的异相共聚物。它具有良好的加工性能和较高的机械性能,尤其是在低温下也具有较高的冲击强度。ISPLEN® PB 130 G1F可以在挤出过程中使用合适的颜料容易着色,最好是以比基础聚合物具有更高熔体流动速率的浓缩物的形式。在挤出和吹塑工艺中的典型应用,例如:具有良好表面光泽的薄膜和片材管道吹塑推荐的熔融温度范围为190至250°C。应为每条生产线优化加工条件。 ISPLEN® PB 130 G1F is a heterophasic copolymer with medium-low fluidity designed for extrusion applications. It has good processability and high mechanical properties especially high impact strength, even at low temperatures. ISPLEN® PB 130 G1F can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS In extrusion and blow-moulding processes, such as: Films and sheets with a good surface gloss Pipes Blow- moulding Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.905 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
1.3 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
60 | ISO 868 | |
拉伸强度 tensile strength |
|||
屈服 yield |
27.0 | MPa | ISO 527-2 |
弯曲模量 Bending modulus |
1100 | MPa | ISO 178 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179 | ||
-20℃ -20℃ |
kJ/m² | ISO 179 | |
23℃ 23℃ |
kJ/m² | ISO 179 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
汽车产业“十四五”发展目标锚定 欲破除产业瓶颈
2021-03-22 搜料网资讯: 中国汽车产业走至一个新的十字路口,转型升级、向高质量发展迈进成为不得不予以正视的一道命题。 近日,《中华人民共和国国民经济和社会发展第十四个五年规划和 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |