牌号简介 About |
---|
氟化物颗粒粉末(铸模粉末)用于生产板材、棒材、钢坯和其他一般铸模。填充化合物在另一页中描述。用途:用于G307、G340和G350的通用型铸造;用于G307、G340和G350的自动型铸造;用于G307、G340和G350杆(直径为20毫米)的等静压铸造;用于G307的冲压成型管道;特点:结块(自由流动)非烧结粉末。G307的最佳粉末流量。G340和G350具有良好的表面光洁度和高体积密度,是G350的最高体积密度。 Fluon®PTFE granular powders (moulding powders) are used for the production of sheets, rods, billets and other general mouldings. Filled compounds are described in other page. Applications: general moulding for G307, G340 and G350 automatic moulding for G307, G340 and G350 isostatic moulding for G307, G340 and G350 rod (diameter 20mm) and pipe by ram extrusion for G307 Characteristics: agglomerated (free flowing) unsintered powders. the best powder flow for G307. good surface finish and high bulk density for G340 and G350 the highest bulk density for G350. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表观密度 Apparent density |
0.92 | g/cm³ | JIS K6891 |
收缩率 Shrinkage rate |
2.8 | % | ISO 294-4 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
39.0 | MPa | JIS K6891 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
350 | % | JIS K6891 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
平均粒径 Average particle size |
350.0 | µm | ASTM D1457 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
阿克苏诺贝尔启动全球化学新创想应战赛
2017-02-06 近日,阿克苏诺贝尔(AkzoNobel)正式启动“Imagine Chemistry”全球化学新创想挑战赛,向世界各地的初创企业、在校学生、研究机构与专业科学家抛出橄榄枝,寻求共同合作机会,利用化学知识来解决现实生活中与化学有关的难题。 该挑战赛是阿克苏诺贝尔公司战略的一部分,旨在进一步调动和发挥自身创新资源,实现增长目标。公司相信成熟的化工行业依旧具有巨大的潜力,而本次挑战赛的目的就是在寻求新机遇的同时充分发掘这一潜力。 “Imagine Chemistr |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |