牌号简介 About |
---|
本产品为聚氨酯系统。GM 984-1公司B(胺)可能因原料而发生颜色变化,但这些颜色变化对产品质量和性能没有影响。后固化材料不耐紫外线,并且会逐渐变暗。但是根据我们的经验,颜色的变化并不影响它的实用性。物理最终性能将在室温下养护7天后或在后处理8小时后达到。在80°C下,作为铝支架上的粘合剂,我们建议使用我们的聚氨酯连接膏KP 8。应用芯盒夹具性能无毒,符合危险材料的规定邵尔D硬度约65硬弹性体,非常好的可浇铸性,无脆性相,非常耐磨。 This product is a polyurethane system. GM 984-1 Comp. B (Amine) can be subject to colour variations due to raw materials, but these colour variations have no influence on the quality and the properties of the product. The postcured material is not UV stable and darkens by and by. However according to our experience the change in colour does not affect its utilizability. Physical final properties will be achieved after 7 days' curing at room temperature or after postcuring for 8 hrs. at 80°C. As bonding agent on aluminium support we recommend our PU coupling paste KP 8. Applications Core boxes fixtures Properties non-toxic according to regulations for hazardous material Shore D hardness approx. 65 hard elastomeric very well castable no brittleness phase very abrasion resistant |
技术参数 Technical Data | |||
---|---|---|---|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
按重量计算的混合比: 100 | ||
硬化法 Hardening method |
按重量计算的混合比: 130 | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
1.13 到 1.17 | g/cm³ | |
粘度 viscosity |
|||
25℃ 25℃ |
2.5 到 2.9 | Pa·s | |
固化时间 Curing time |
|||
20℃ 20℃ |
12 到 16 | hr | |
储存稳定性 storage stability 2 |
|||
20 ℃ 20 ℃ 2 |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
拉伸强度 tensile strength |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
泰伯耐磨性 Taber abraser |
|||
500 周期,500 g,H-18 转轮 500 cycles, 500 g, H-18 wheels |
mg | 内部方法 | |
弯曲应变 Bending strain |
% | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 200 g |
【新闻资讯】查看全部
全球首个耐低温易剥离包装膜问世
2016-10-17 日本DIC株式会社在包装用多层薄膜“DIFAREN”系列的基础上,研发出了可在130℃下进行加压加热杀菌处理的“E1500T”系列产品。据称,该系列产品是业界首个高耐热性的易剥离热封薄膜。 米饭和副食品等 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |