牌号简介 About |
---|
产品细节:超高性能热塑性聚合物、30%聚醚酮增强碳纤维、适用于注塑成型的半结晶颗粒、易流动、呈黑色。应用领域:适用于高温应用,需要更高强度和刚度的承重应用。耐腐蚀环境的化学性,适用于医疗和食品接触应用的灭菌。 Product Details: Ultra high performance thermoplastic polymer, 30% carbon fiber reinforced in Polyether Ketone, semi-crystalline granules suitable for injection molding, easy flow, Black in color. Application Areas: Suitable for high temperature applications, where higher strength & stiffness in load- bearing application is required. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.40 | g/cm³ | |
收缩率 Shrinkage rate 2 |
|||
TD TD 2 |
0.60 | % | |
MD MD 2 |
0.10 | % | |
吸水率 Water absorption rate |
|||
平衡 balance |
0.040 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
No Break | ASTM D256 | |
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
连续使用温度 Continuous use temperature |
℃ | UL 746B | |
玻璃化转变温度 Glass transition temperature |
℃ | ASTM D3418 | |
熔融温度 Melting temperature |
℃ | ASTM D3418 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.80 mm 0.80 mm |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,23℃ Shore D, 23 ℃ |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
M 级 M-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 420°C nozzle, 220°C Mold |
【新闻资讯】查看全部
国立科技进入生物降解材料赛道
2021-09-15 搜料网资讯: 近日,广东国立科技股份有限公司发布向特定对象发行股票预案,拟向不超过35名(含)特定投资者,募资不超过2.82亿元,用于生物降解材料及制品产业化建设项目、生物降 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |