牌号简介 About |
---|
UNITHENE® LH514(高密度聚乙烯)具有较高的熔融流动指数,适用于注塑成型,应用领域为轻薄、智能的家居用品、玩具等。UNITHENE® LH514具有良好的加工性能、高冲击强度和抗应力开裂性能,硬度好,硬度高,表面光泽好,翘曲度小,收缩率低。UNITHENE® LH514可以通过将颜料干混或熔融混匀到树脂中,很容易着色成任何颜色。 UNITHENE LH514 (HDPE)having high melt flow index suitable used for injection molding and the applications are thin and smart housewares, toys, etc. UNITHENE LH514 possesses good processability, high impact strength and good resistance to stress cracking, good stiffness, high hardness, good surface gloss, less warpage, low shrinkage. UNITHENE LH514 can be easily pigmented to any color by either dry blending or melt blending of the pigment into the resin. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.956 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
12 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
39 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
< -76.0 | ℃ | ASTM D746 |
维卡软化温度 Vicat Softening Temp |
125 | ℃ | ASTM D1525 |
熔融峰值温度 Melting peak temperature |
℃ | ASTM D3418 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服 yield |
MPa | ASTM D638 | |
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D747 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
大连商品交易所25日PP行情表
2022-05-25 大连商品交易所 日行情表 查询日期: 20 22 年 05 月 25 日 本月第 15 个交易日 本年第 92 个交易日 商品 交割月份 开盘价 最高价 最低价 收盘价 前结算价 结算价 涨跌 涨跌 1 成交量 持仓 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |