牌号简介 About |
---|
RP-350是一种注射成型共聚物认证的底漆树脂,设计用于高速注射薄壁应用,要求具有良好的抗冲击性和很好的清晰度。RP-350具有很好的尺寸稳定性和加工性、快速充型、高流速、快速循环时间、低翘曲和良好的机械性能平衡。RP-350符合FDA法规21CFR 177.1520(a)(3)(i)/(c)3.1+3.2,以及大多数有关与食品接触使用聚丙烯的国际法规。 RP-350 is an injection molding copolymer certified prime resin designed for high speed injection of thin-walled applications requiring good impact resistance and very good clarity. RP-350 exhibits very good dimensional stability and processability, rapid mold filling, high flow rate, fast cycle time, low warpage, and a good balance of mechanical properties. RP-350 complies with FDA regulation 21CFR 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
35 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
53 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,注塑成型 0.45 MPa, unannealed, injection molded |
85.0 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
138 | ℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
屈服 yield 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus 3 |
|||
1% 正割 1% secant 3 |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
茂名石化:高密度聚乙烯5502LW首次走出国门
2021-12-15 搜料网资讯: 12月10日,随着装载茂名石化6个集装箱102吨小中空专用料5502LW产品的轮船在湛江港口码头解缆起锚,开往目的地非洲刚果,标志着茂名石化高密度聚乙烯5502LW首次成功走出 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |