牌号简介 About |
---|
辐照交联低烟无卤阻燃聚烯烃电线电缆料是以氢氧化物为主要阻燃剂的环境阻燃材料。脱水吸热炭化起阻燃作用。辐照交联低烟无卤阻燃聚烯烃电线电缆料,其机械性能满足电子线、汽车线和光伏线交联聚乙烯(XLPE)涂层的要求,可燃性达到UL1581 VW-1,并满足RoHS、SVHC、PFOS&PFOA、16P、卤素、多环芳烃等的要求。 Irradiation cross-linked low-smoke halogen-free flame retardant polyolefin wire & cable compound is environmental flame retardant material with hydroxide as main flame retardant elements. Dehydration endothermic and carbonize play the flame retardant performance. Irradiation cross-linked low-smoke halogen-free flame retardant polyolefin wire & cable compound, which Mechanical properties meet the requirements of XLPE coating of electronic wire, automotive wire and photovoltaic wire, flammability reach UL1581 VW-1, and meet the requirements of ROHS, SVHC, PFOS & PFOA, 16P, Halogen, PAHs...etc. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.35 | g/cm³ | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
14.4 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
380 | % | |
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
空气中拉伸强度的变化率 The rate of change in tensile strength in air |
|||
180℃,168 hr 180℃,168 hr |
-5.0 | % | |
空气中极限伸长率的变化率 The rate of change in ultimate elongation in air |
|||
180℃,168 hr 180℃,168 hr |
-20 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
|||
20 ℃ 20 ℃ |
ohms·cm | ||
介电强度 Dielectric strength |
kV/mm | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
极限氧指数 Extreme oxygen index |
% | ||
烟雾密度 Smoke density |
|||
Flame Flame |
|||
Flameless Flameless |
备注 |
---|
2、Hydroxide |
【新闻资讯】查看全部
环保、跌价潮再次袭来,2017改性塑料的开展和机遇!
2017-02-24 2017年的塑料市场命运多舛,涨价的风波还没消停,环保又开始了,面对这样的情况,2017年的改性市场将如何发展? 我国改性塑料行业存在较大发展空间。数据显示,中国塑料总产量从2004年的近1800万吨上涨至2016年的近8000万吨,改性化率也从8%增长到19%。 然而,相比全球40%的改性塑料用于汽车行业,中国仅10%左右。衡量一个国家塑料工业发展水平的重要指标――塑钢比,我国仅为30∶70,不及世界平均的50∶50,更远不及发达国家如美国的70:30和德 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |