牌号简介 About |
---|
聚偏氟乙烯(PVDF)的拉伸性能和冲击强度反映了其强度和韧性。与许多热塑性塑料相比,聚偏氟乙烯具有优异的抗蠕变和抗疲劳性能,但在薄膜等薄片中,聚偏氟乙烯的组成部分是柔性和透明的。应用范围包括:过滤器隔膜释放膜压电薄膜耐化学腐蚀罐衬里燃料电池密封医用袋聚偏氟乙烯薄膜的优点:优异的耐紫外线化学腐蚀性和耐候性、低NBS发烟性和优越的LOI、优异的太阳能透过率、优异的介电强度、高H。耐腐蚀性-氟聚合物树脂的优良物理和机械性能符合FDA标准FM 4910认证 PVDF is strong and tough as reflected by its tensile properties and impact strength. Compared to many thermoplastics, PVDF has excellent resistance to creep and fatigue, yet in thin sections such as films, PVDF components are flexible and transparent. Applications Include: Filters Diaphragms Release films Piezoelectric films Chemical resistant tank linings Fuel cell seals Medical bags Advantages of PVDF Film: Excellent chemical resistance Stable to UV and the effects of weather Low NBS smoke generation and superior LOI Excellent transmittance of solar energy Excellent dielectric strength High heat resistance Excellent physical and mechanical properties for a fluoropolymer Resin FDA compliant FM 4910 approved |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.78 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.010 | % | ASTM D570 |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弹性模量 Elastic modulus |
|||
MD MD |
1720 | MPa | ASTM D882 |
拉伸强度 tensile strength |
|||
MD,屈服 MD, yield |
52.1 | MPa | ASTM D882 |
拉伸应变 Tensile strain |
|||
MD,断裂 MD, fracture |
160 | % | ASTM D882 |
弯曲模量 Bending modulus |
|||
MD MD |
MPa | ASTM D790 | |
透氧率 Oxygen permeability |
cm³·mm/m²/atm/24 hr | ||
水气透过率 Water vapor transmittance |
g·mm/m²/atm/24 hr | ||
二氧化碳渗透性 Carbon dioxide permeability |
cm³·mm/m²/atm/24 hr | ||
氮传输速率 Nitrogen transfer rate |
cm³·mm/m²/atm/24 hr | ||
面积系数 Area coefficient |
in²/lb/mil | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
连续使用温度 Continuous use temperature |
℃ | ||
熔融温度 Melting temperature |
℃ | DSC | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
介电强度 Dielectric strength |
|||
0.0762 mm 0.0762 mm |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
|||
透光率 Transmittance |
% | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength |
|||
prop prop |
kN/m | ASTM D1004 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
攀枝花地域的钛白粉企业陆续复产
2017-08-15 2017年7月,在攀枝花环保局督查压力下,攀枝花钒钛工业园金江园区渣场被要求停止运营,意味着整个园区化工企业全面停产。 在该区域内的多家钛白粉生产企业:攀枝花海峰鑫、力卓钒钛、钛海科技、大互通、钛都、兴中等都受到影响,当时消息是,预计停产整改1-2个月(具体复产时间将由环保局等监督部门根据各厂整改完成后的状态是否达标而定)。 园区内部分企业产能为:攀枝花市钛都化工生产能力2.4万吨高钛渣、3万吨硫酸法锐钛型钛白;大互通集团产能12万吨钛白粉、配套30万吨硫酸 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |