牌号简介 About |
---|
Edgetek工程热塑性化合物产品组合涵盖广泛的标准和定制高性能材料。该产品组合包括用于高温工作环境的高温材料、用于承载和高强度应用的高模量/结构材料以及阻燃产品。这些化合物是基于选择的工程热塑性树脂,与增强添加剂,如碳纤维,玻璃纤维和玻璃珠复合。 The Edgetek® Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for elevated service temperature environments, high-modulus / structural materials for load-bearing and high-strength applications and flame-retardant products. These compounds are based on select engineering thermoplastic resins that are compounded with reinforcing additives such as carbon fiber, glass fiber and glass beads. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.54 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 到 0.30 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
24hr,3.18 mm 24hr,3.18 mm |
0.10 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus 2 |
11700 | MPa | ASTM D638 |
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
165 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
断裂 fracture 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding |
J/m | ASTM D256-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火,3.2 mm 1.8 MPa, unannealed, 3.2 mm |
℃ | ASTM D648 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 0.20 in/min |
【新闻资讯】查看全部
可以吃的大米吸管可在热饮中浸泡2-3个小时
2018-12-03 根据每日经济新闻官方微博的报道,韩国下达禁塑之后,刺激了大米习惯等可食用替代品的快速发展,据统计,大米吸管单月产量达3亿根。 据介绍,这种可以吃的大米吸管可以在热饮中浸泡2-3个小时,在冷饮中坚持时间更长 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |