牌号简介 About |
---|
NH53G是一种由云母填充物改性的聚丙烯化合物,用于提高机械刚度和耐热性。它是通过修改各种基础PPS,包括HIPP(高等规聚丙烯),并由汉华道达尔的特殊加工技术。本产品常用于空调风机等产品中,要求刚性高、耐热性高、弯曲度低。 Description Mica compound PP is modified by a mica filling to improve mechanical rigidity and heat-resistance. It is produced by modifying a variety of base PPs, including HIPP (High Isotactic Polypropylene), and by Hanwha Total's special processing technologies. These products are commonly used in products such as air conditioner fans and the like, requiring high rigidity, high heat-resistance and low bending. Characteristics Mica PP is available in several varieties for requirements of high rigidity, ultra-high rigidity and so forth. It can be adjusted to different molding conditions, and we also produce a mica PP with improved rigidity due to blending with G/F. Applications Mica PP helps improve rigidity and impact-resistance and has remarkable heat-resistance. It also offers high-temperature strength, excellent size stability and outstanding electric properties. For these strengths, it is proper for the following uses: Automobile parts, valves, door assemblies, etc. Electric and electronic parts, such as in air conditioner fans. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
6.0 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD:2.0 mm MD:2.0 mm |
0.40 到 1.1 | % | ASTM D955 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
59 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
159 | ℃ | ASTM D648 |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength 1 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 1 |
|||
断裂 fracture 1 |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D747 | |
弯曲模量 Bending modulus 2 |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2,0 in/min |
3 0,20 in/min |
【新闻资讯】查看全部
开工即“爆冷”!鲁西跌500!科思创跌500!乐天跌200!一车PC料直接亏了几个
2022-10-08 扫描上图二维码,可以免费下载 搜料 APP 开工第一天!行情有点爆冷啊! 以PC为例,鲁西发挥一贯的风格,节后率先开盘, 市场价开跌500元! 鲁西化工这一手,是想直接带崩节后PC行情啊 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |