牌号简介 About |
---|
Baydul® 730 IBS是一种用于反应注射成型(RIM)工艺的硬质聚氨酯结构泡沫体系。该系统包括一个专门设计的交互式吹扫系统(IBS),作为两个反应性液体成分提供。A组分是一种改性的聚合物二苯基甲烷二异氰酸酯(PMDI)预聚物混合物,B组分是一种不含CFC-或HCFC发泡添加剂的配方多元醇体系。Baydur® 730 IBS系统设计用于一般用途,用于建筑、农业、消费品、工业和特种汽车市场。这些应用通常利用了材料的强度,以及其优良的表面光洁度、大部件性能和良好的流动性。与任何产品一样,在给定应用中使用Baydur® 730 IBS系统必须由用户提前进行测试(包括现场测试等),以确定适用性。 Baydur 730 IBS is a rigid polyurethane structural foam system used in the reaction injection molding (RIM) process. This system incorporates a specially engineered interactive blowing system (IBS) and is supplied as two reactive liquid components. Component A is a modified polymeric diphenylmethane diisocyanate (PMDI) prepolymer blend, and Component B is a formulated polyol system containing no CFC- or HCFC-blowing additives. The Baydur 730 IBS system was designed for general-purpose applications and is used in the construction, agricultural, consumer products, industrial and specialty automotive markets. The applications typically take advantage of the material's strength, as well as its excellent surface finish, large part capability and good flowability. As with any product, use of the Baydur 730 IBS system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.399 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
ASTM D955 | ||
MD:6.35 mm MD:6.35 mm |
0.70 到 0.90 | % | ASTM D955 |
MD:12.7 mm MD:12.7 mm |
0.70 到 0.90 | % | ASTM D955 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength 2 |
12 | kJ/m² | 内部方法 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火,6.35 mm 0.45 MPa, unannealed, 6.35 mm |
70.0 | ℃ | ASTM D648 |
0.45 MPa,未退火,12.7 mm 0.45 MPa, unannealed, 12.7 mm |
℃ | ASTM D648 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ASTM D2240 | ||
邵氏 D,6.35 mm Shaw D, 6.35 mm |
ASTM D2240 | ||
邵氏 D,12.70 mm Shore D, 12.70 mm |
ASTM D2240 | ||
拉伸强度 tensile strength |
ASTM D638 | ||
断裂,6.35 mm Fracture, 6.35 mm |
MPa | ASTM D638 | |
断裂,12.70 mm Fracture, 12.70 mm |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
断裂,6.35 mm Fracture, 6.35 mm |
% | ASTM D638 | |
断裂,12.70 mm Fracture, 12.70 mm |
% | ASTM D638 | |
弯曲模量 Bending modulus |
ASTM D790 | ||
6.35 mm 6.35 mm |
MPa | ASTM D790 | |
12.70 mm 12.70 mm |
MPa | ASTM D790 | |
弯曲强度 bending strength |
ASTM D790 | ||
6.35 mm 6.35 mm |
MPa | ASTM D790 | |
12.70 mm 12.70 mm |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 0.5 |
3 0.25 in |
【新闻资讯】查看全部
欧盟施行一次性容器和塑料购物袋限制措施
2018-07-23 日本中央环境审议会7月18日召开循环型社会小组会议,讨论旨在大幅削减作为海洋污染等引发国际高度关注的塑料垃圾“塑料资源循环战略”。新设立的小委员会将研究具体措施和数值目标,最快年内汇总报告草案。欧盟等率先实施的一次性容器和塑料购物袋限制措施将成为焦点。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |