牌号简介 About |
---|
Sumikon PM-TX115是一种热耗散型塑料,基于酚醛聚合物的电绝缘材料。它以粒状/成型粉末的形式提供,用于成型。 SUMIKON PM-TX115 is a Heat dissipative themoset molding compounds, Electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.10 | g/cm³ | JIS K6911 |
收缩率 Shrinkage rate |
|||
MD MD |
0.27 | % | JIS K6911 |
吸水率 Water absorption rate |
|||
平衡 balance |
0.13 | % | JIS K6911 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲模量 Bending modulus |
19000 | MPa | JIS K6911 |
弯曲强度 bending strength |
115 | MPa | JIS K6911 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
kJ/m² | JIS K6911 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | JIS K6911 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength 2 |
kV/mm | JIS K6911 | |
耐电弧性 Arc resistance |
sec | JIS K6911 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
绝缘电阻 insulation resistance |
JIS K6911 | ||
-- -- 3 |
ohms | JIS K6911 | |
-- -- 4 |
ohms | JIS K6911 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 方法B(逐步) |
3 After boiling |
4 As molded |
【新闻资讯】查看全部
5月行情爆火!塑料原料价格起飞
2022-05-05 国外化工企业不受物流封控、开工受限的影响,市场依旧异常火爆,新函+旧函之下,塑胶原料价格持续暴涨! 近日,三菱化学发布涨价通知,宣布将从5月9日起上调国内和出口聚乙烯醇 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |