牌号简介 About |
---|
ULTM泡沫是一种具有优异的火焰、烟雾和毒性性能的聚醚酰亚胺基热塑性泡沫材料。这种材料结合了高强度重量比和低吸湿性。泡沫还具有优异的介电性能。ULTM泡沫的目标是在结构防火性能,雷达透明度,或极端的热或冷环境需要的应用。ULTM泡沫是可热成型的,与酚醛预浸料相容。如有要求,可提供有关处理或辅助操作的信息。 ULTEM foam is a polyetherimide based thermoplastic foam with excellent flame, smoke and toxicity performance. The material combines a high strength to weight ratio with low moisture absorption. The foam also possesses excellent dielectric properties. ULTEM foam is targeted at applications where structural fire performance, radar transparency, or extreme hot or cold environments are required. ULTEM foam is thermoformable and compatible with phenolic pre-pregs. Information on processing or secondary operations is available upon request. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.060 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
4.0 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
1.70 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
|||
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
37 | MPa | ASTM D638 |
剪切强度 shear strength |
|||
|
0.80 | MPa | ASTM D790 |
抗压强度 compressive strength |
MPa | ASTM D1621 | |
压缩模量 Compression modulus |
MPa | ASTM D162 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
导热系数 Thermal conductivity coefficient |
W/m/K | JIS R2618 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 In plane |
3 Perpendicular to plane |
4 5 minute test |
5 2 minute test |
【新闻资讯】查看全部
踢踏屋鞋业公司向江苏省质量技术监视局备案了召回方案
2018-05-02 据江苏省质量技术监督局官网消息,日前,南京踢踏屋鞋业有限公司向江苏省质量技术监督局备案了召回计划,决定自2018年4月25日至2018年7月20日召回2017年6月1日至2017年6月25日期间生产的踢踏屋牌(78062)儿童鞋,受影响的产品数量为624双。 本次召回所涉及的儿童鞋,由于童鞋帮面深蓝色橡塑的邻苯二甲酸酯类增塑剂超标,可能对儿童健康造成一定影响。 南京踢踏屋鞋业有限公司将在销售门店的店堂发布召回信息,向消费者通知产品召回相关事宜。公司将联系免费 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |