牌号简介 About |
---|
ABS的典型冲击性能和PMMA的出色透明度在两个新等级的EstaLux中找到了完美的平衡:9202 A-9206 A它包含了不同于熔体流动的注塑用MAB,两者都是透明的,并且可以按照客户要求的规格对其进行着色。与化合物Estalux系列A有可能生产玩具,家用电器,办公设备,运动和休闲产品,化妆品包装。 The typical impact properties of the ABS and the excellent transparency of the PMMA find a perfect balance in the two new grades Estalux : 9202 A - 9206 A. It consists in MABS for injection moulding that are different for Melt flow, both are clear and it's possible to have them colored on the specification required by the customer. With the compounds Estalux serie A it's possible to produce toys, household appliances, office devices, sport and leisure products, cosmetic packaging. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.07 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
ASTM D1238 | ||
220℃,10.0kg 220℃,10.0kg |
2.0 | g/10min | ASTM D1238 |
220℃,21.6kg 220℃,21.6kg |
18 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD MD |
0.40 到 0.70 | % | 内部方法 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
2050 | MPa | ASTM D638 |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服 yield |
MPa | ASTM D638 | |
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
|||
-- -- |
℃ | ASTM D1525 2 | |
-- -- |
℃ | ASTM D1525 3 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
1.60 mm 1.60 mm |
UL 94 | ||
3.20 mm 3.20 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 标准 B (120°C/h), 压 力1 (10N) |
3 标准 B (120°C/h), 载荷2 (50N) |
【新闻资讯】查看全部
3D打印与塑料造出火箭发起机
2017-05-08 近日,美国麻省理工学院(MIT)一个专注于火箭相关项目的独立学生小组,成功测试了一款完全3D打印的火箭发动机。该团队证明使用塑料3D打印发动机是可行的,也许可以为廉价火箭发射铺平道路。 当您想象世界顶尖大学的学霸们建造火箭时,也许会想到高端技术、精确计算和坚固材料。但MIT的这个火箭研究小组却用塑料来建造火箭发动机。 研究人员解释说:“使用塑料打印火箭发动机是一个独特的成就。包括SpaceX和NASA在内的几个团体使用金属打印火箭发动机,但金属打印机价格昂贵 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |