牌号简介 About |
---|
Daikin Polyflon M-12是一种聚四氟乙烯原始粒状细切削树脂。这种一般用途的成型粉是专门设计用于中小型钢坯压缩成型。它特别适用于需要优良物理和电气性能的薄膜应用。 Daikin-Polyflon™ M-12 is a polytetrafluoroethylene virgin granular fine cut resin. This general purpose molding powder has been specifically designed for use in small to medium billet compression molding. It is particularly well suited to thin skived film applications requiring excellent physical and electrical properties. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.14 到 2.17 | g/cm³ | ASTM D4894 |
表观密度 Apparent density |
> 0.30 | g/cm³ | ASTM D4894 |
收缩率 Shrinkage rate |
|||
MD MD |
2.7 到 3.7 | % | 内部方法 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
> 35.0 | MPa | ASTM D4894 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
> 350 | % | ASTM D4894 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | 内部方法 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
医疗植入体新资料又有新停顿!
2016-06-23 医疗市场对高强度的可生物降解材料的需求在日益增加。相关数据显示,每年约有890万例骨折,而价值3000亿欧元的全球医疗技术市场正以每年6%的速度增长。在全球医疗市场中,美国占领的市场份额最大,约为40%,其次为欧洲和日本。美国公司也是全球医疗植入技术的主要参与者。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |