牌号简介 About |
---|
Econ® 80是一种经济的Shore 80A聚氨酯橡胶,适用于各种模具制造和工业应用。它是一种成本更低、治疗速度更快的替代我们流行的PMC-780。物理性能低于PMC-780。这是一种无气味系统,具有1a:1b混合比和低粘度,便于混合和浇注。室温下的工作时间约为13分钟,处理时间为6小时,橡胶一夜固化,收缩最小。Econ® 80是半透明的,很容易用如此强烈的着色剂着色。Econ® 80用于制作混凝土和树脂的短期模具、混凝土冲压垫、橡胶机械零件、涂层织物、工业设备的现浇垫圈和地下室。 Econ® 80 is an economical Shore 80A urethane rubber suitable for a variety of mold making and industrial applications. It is a lower cost, faster cure alternative to our popular PMC®-780. Physical properties are lower vs. PMC®-780. This is a no odor system that features a 1A:1B mix ratio and a low viscosity for easy mixing and pouring. Working time is about 13 minutes at room temperature, handling time is 6 hours and rubber cures overnight with minimal shrinkage. Econ® 80 is translucent and easily colored with SO-Strong® or Ignite® colorants. Econ® 80 is used to make short run molds for casting concrete and resins, concrete stamping pads, rubber mechanical parts, coating fabrics, pour-in-place gaskets for industrial equipment and burial vaults. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.06 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.947 | cm³/g | |
收缩率 Shrinkage rate |
|||
MD MD |
0.14 | % | ASTM D2566 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
80 | ASTM D2240 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
6.58 | MPa | ASTM D412 |
100% 应变 100% strain |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
撕裂强度 tear strength 2 |
kN/m | ASTM D624 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
储存稳定性 storage stability |
|||
23℃ 23℃ |
min | ASTM D2471 | |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脱模时间 stripping time |
|||
23℃ 23℃ |
min | ||
后固化时间 Post curing time |
|||
23℃ 23℃ |
hr | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 C 模具 |
【新闻资讯】查看全部
恭喜!金能科技45万吨/年聚丙烯装置试产成功
2021-07-28 搜料网资讯: 据悉,金能科技首套45万吨/年聚丙烯装置于2021年7月27日首次产品试产成功!一期PP项目以均聚聚丙烯为主,后期还有二期聚丙烯装置建设规划。 作为青岛千亿级绿色化工产 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |