公司信息及水印
牌号简介 About |
---|
低成本半刚性聚氨酯浇注树脂的光滑铸造半刚性生产线能够快速固化成具有优异抗冲击性能的半刚性塑料。这些塑料易于使用(体积比为1a:1b),并且粘度低,气泡截留最小。通过添加如此强烈的色彩或点燃色彩颜料,鲜艳的色彩是可能的。这些半刚性塑料将真正采取打击,并提供卓越的耐磨性。它们适用于制造高抗冲击工具、原型、耐磨零件、铸造模式、辊面、振动垫、快速混凝土冲压垫等。Smooth-Cast® 65D(以前为光滑铸造转子)具有独特的逐渐固化轮廓,使其非常适合旋转铸造应用。 The Smooth-Cast® Semi-Rigid line of low-cost semi-rigid urethane casting resins cure quickly to semi-rigid plastics that offer exceptional strength and impact resistance. New Formulations - New Look! Smooth-Cast 45D, 60D and 61D are newly reformulated with a translucent white appearance and improved physical properties. All Smooth-Cast semi-rigids are now mercury free and phthalate free. These plastics are easy-to-use (mix ratio is 1A:1B by volume) and have low viscosities for minimal bubble entrapment. Vibrant colors are possible by adding SO-Strong® color tints or Ignite® color pigments. These semi-rigid plastics are good for making impact resistance prototypes, abrasion resistant parts, climbing holds, foundry patterns, roller facings, vibration pads, etc. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.05 | g/cm³ | ASTM D792 |
特定体积 Specific volume |
0.954 | cm³/g | |
收缩率 Shrinkage rate |
|||
MD MD |
1.0 | % | ASTM D2566 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
储存稳定性 storage stability |
|||
23℃ 23℃ |
2.5 | min | ASTM D2471 |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脱模时间 stripping time 2 |
|||
23℃ 23℃ 2 |
10 到 15 | min | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Cure Time |
【新闻资讯】查看全部
复合资料行业领导者的HP-RTM生产处理方案
2017-07-19 高压树脂传递模塑(HP-RTM)是大规模工业化量产的解决方案,其关键技术在于树脂注入和模塑两个阶段。目前,汽车行业中越来越多的碳纤维复合材料零部件生产商,都在选择康隆(Cannon)的环氧树脂和聚氨酯树脂配方的湿部和干部设备。 高压树脂传递模塑(HP-RTM)是传统树脂传递模塑(RTM)的大规模工业化量产的解决方案,使用的也是快速固化的化学原料。HP-RTM工艺是通过一个混合头,将基础树脂注入到模具内,并浸润其中的预成型纤维织物,最后快速固化形成高强度的复合材料部件。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |