公司信息及水印
牌号简介 About |
---|
模克隆AR片材是一种单面或双面镀硬的聚碳酸酯产品,它为聚碳酸酯固有的冲击强度和清晰度带来了更高的耐磨性和表面硬度。专有的硬涂层还提供耐化学性和持久的户外风化性能。本产品提供清晰的标准色调,或可定制与任何颜色匹配的颜色。模克隆AR板有七(7)年的产品保修期,以防破损、发黄和起雾。保修条款可根据要求提供。应用平面建筑玻璃、机械防护和层压板 Makrolon® AR sheet is a one or both sides hard-coated polycarbonate product that adds higher abrasion resistance and surface hardness to polycarbonate's inherent performance benefits of impact strength and clarity. The proprietary hard-coat also provides chemical resistance and long lasting outdoor weathering performance. This product is available in clear, a range of standard tints, or can be custom matched to any color. Makrolon AR sheet has a seven (7) year Limited Product Warranty against breakage, yellowing, and hazing. The terms of the warranty are available on request. Applications Flat architectural glazing, machine guards, and laminates |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.20 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.15 | % | ASTM D570 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
3.2mm 3.2mm |
850 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
3.2 mm 3.2 mm |
无断裂 | ASTM D256 | |
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
|||
3.18 mm 3.18 mm |
> 63.7 | J | ASTM D3763 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
脆化温度 Embrittlement temperature |
℃ | ASTM D746 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
导热系数 Thermal conductivity coefficient |
W/m/K | ASTM C177 | |
遮阳系数 Sunshade coefficient |
NFRC 100-2010 | ||
Clear:5.99 mm Clear:5.99 mm |
NFRC 100-2010 | ||
Gray or Bronze:5.99 mm Gray or Bronze:5.99 mm |
NFRC 100-2010 | ||
U Factor U Factor |
NFRC 100-2010 | ||
Summer:5.99 mm Summer:5.99 mm |
BTU/hr/ft²/°F | NFRC 100-2010 | |
Summer:9.53 mm Summer:9.53 mm |
BTU/hr/ft²/°F | NFRC 100-2010 | |
Winter:5.99 mm Winter:5.99 mm |
BTU/hr/ft²/°F | NFRC 100-2010 | |
Winter:9.53 mm Winter:9.53 mm |
BTU/hr/ft²/°F | NFRC 100-2010 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
|||
3.18 mm,在空气中 3.18 mm in air |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
10 Hz 10 Hz |
ASTM D150 | ||
60 Hz 60 Hz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
60 Hz 60 Hz |
ASTM D150 | ||
耐电弧性 Arc resistance |
ASTM D495 | ||
-- -- 6 |
sec | ASTM D495 | |
-- -- 7 |
sec | ASTM D495 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
1.50 mm 1.50 mm |
UL 94 | ||
10.00 mm 10.00 mm |
UL 94 | ||
Flash Ignition Temperature Flash Ignition Temperature |
℃ | ASTM D1929 | |
Horizontal Burn(AEB) Horizontal Burn(AEB) |
cm | ASTM D635 | |
自燃温度 Autoignition temperature |
℃ | ASTM D1929 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
ASTM D542 | ||
透光率 Transmittance |
ASTM D1003 | ||
3000 µm 3000 µm 8 |
% | ASTM D1003 | |
3000 µm 3000 µm 10 |
% | ASTM D1003 | |
3000 µm 3000 µm 11 |
% | ASTM D1003 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Chemical Resistance Chemical Resistance |
ASTM D1308 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
ASTM D785 | ||
M 级 M-level |
ASTM D785 | ||
R 级 R-level |
ASTM D785 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服 yield |
MPa | ASTM D638 | |
极限 limit |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
剪切模量 shear modulus |
MPa | ASTM D732 | |
剪切强度 shear strength |
ASTM D732 | ||
-- -- 3 |
MPa | ASTM D732 | |
-- -- 4 |
MPa | ASTM D732 | |
泊松比 Poisson's ratio |
ASTM E132 | ||
耐磨耗性 Wear resistance 5 |
|||
Delta Haze Delta Haze 5 |
% | ASTM D1044 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Yield |
3 Ultimate |
4 100 Cycles, CS-10F Wheel, 500 g load |
5 Tungsten Electrodes |
6 Steel Strip Electrode |
7 K09 Bronze |
8 I35 Dark Gray |
9 Clear |
10 I30 Gray |
【新闻资讯】查看全部
全国节能宣传周 全国低碳日活动将启动
2022-05-31 5月26日,国家发改委、生态环境部、科技部、工业和信息化部等部门联合发出《关于开展2022年全国节能宣传周和全国低碳日活动的通知》。《通知》将2022年全国节能宣传周定为6月13日 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |