牌号简介 About |
---|
KRATON® G1652 M是一种基于苯乙烯和乙烯/丁烯(SEBS)的半透明线性三嵌段共聚物,苯乙烯/橡胶比为30/70。它由北美提供,其物理形式如下所示。Kraton G1652 MU-作为未经抛光的粉末提供,Kraton G1652 MS-作为粉末提供,Kraton G1652 M用作沥青和聚合物的改性剂。它也适用于制备用于鞋类应用的化合物,并且可用于制备粘合剂、密封剂和涂层。 Kraton G1652 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1652 MU - supplied as an undusted powder Kraton G1652 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.910 | g/cm³ | ASTM D4025 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,5.0kg 230℃,5.0kg |
5.0 | g/10min | |
Antioxidant Additive Antioxidant Additive 2 |
0.030 到 0.10 | % | 内部方法 |
聚苯乙烯含量 Polystyrene content |
29 到 31 | % | 内部方法 |
Total Extractables Total Extractables |
< 1.0 | % | 内部方法 |
挥发物 Volatiles |
% | 内部方法 | |
溶液粘度 Solution viscosity |
|||
20wt%甲苯,25℃ 20wt% toluene, 25 ℃ |
mPa·s | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,10 秒 Shore A, 10 seconds |
ASTM D2240 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D412 | |
300% 应变 300% strain |
MPa | ASTM D412 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D412 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Styrene/Rubber ratio Styrene/Rubber ratio |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Non-staining phenolic antioxidant |
【新闻资讯】查看全部
2015年塑料制品行业完成出口交货值2192.6亿元
2016-01-27 中国轻工业经济运行及预测预警系统监测显示:2015年塑料制品行业规模遇上企业完成出口交货值2192.6亿元,同比下降3.72%。其中:12月份完成出口交货值206.8亿元,为2015年内单月增幅最高值,同比下降2.01%。出口交货值月度增速已连续三个月回升。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |