牌号简介 About |
---|
用于牙科应用的X射线不透明、白色颜料聚醚醚酮VESTAKEEP® DC4430 R是一种白色颜料聚醚醚酮(PEEK)级,特别设计用于可移动和固定义齿、牙冠和牙桥。VESTAKEEP® DC4430 R含有6%的硫酸钡,使其X射线不透明。对于VESTAKEEP® DC4430 R,已根据ISO 10993-1永久性粘膜接触建议测试生物相容性。该化合物具有良好的生物相容性和优异的机械、热和化学抗性。 X-ray opaque, white pigmented polyether ether ketone for dental applications VESTAKEEP® DC4430 R is a white pigmented polyether ether ketone (PEEK) grade that is especially designed for removable and fixed dentures, crowns and bridges. VESTAKEEP® DC4430 R contains 6% Barium sulphate to render it x-ray opaque. For VESTAKEEP® DC4430 R, biocompatibility has been tested according to ISO 10993-1 recommendations for permanent mucous membrane contact. The compound composition is optimised for high biocompatibility and superior mechanical, thermal and chemical resistance. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.51 | g/cm³ | ISO 1183 |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
0.40 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
5100 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服 yield |
110 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
屈服 yield |
4.2 | % | |
断裂 fracture |
% | ||
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
-- -- |
℃ | ISO 306/A | |
-- -- |
℃ | ISO 306/B | |
熔融温度 Melting temperature 2 |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:23~55℃ MD:23~55℃ |
1/℃ | ISO 11359-2 |
备注 |
---|
2、2nd heating |
【新闻资讯】查看全部
震雄中东推出首台大型二板注塑机
2016-06-29 震雄中东办仓库2013年设立于迪拜杰贝.阿里自由贸易区,总面积达300平方米。从设立至今,作为震雄集团在中东地区的销售及服务枢纽,近期又取得突破性成绩�D成功在中东市场推入首台大型二板注塑机―SM2600-SVP2。该机器将用于客户生产塑料卡板及多型腔的板条箱供应当地市场。 震雄SM系列二板伺服驱动注塑机是二板机领域的领导者,结合了欧洲及日本先进设计,具有新颖的设计亮点:极速移模设计,最高可达750mm/秒、专利导柱及液压连接设计、高速自动调模功能、专利导柱螺纹抱合结构、配 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |