牌号简介 About |
---|
耐用性和人性化的共聚酯Skyplete G系列是共聚酯,不含ABS或PC中发现的BPA苯乙烯等有害成分。G系列具有卓越的耐用性和美观的表面。GD100低光泽、有吸引力的哑光表面低加工温度喷嘴温度:220-240°C床温:60°C Durable & human-friendly copolyester SKYPLETE G-series are copolyesters, not containing hazardous components such as styrene of BPA found in ABS or PC. G-series deliver outstanding durability and aesthetic surface. GD100 Low gloss and attractive matt surface Low processing temperature Nozzle temp: 220 - 240°C Bed temp: 60°C |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.22 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
平衡 balance |
< 0.20 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服 yield |
40.2 | MPa | |
断裂 fracture |
7.85 | MPa | |
拉伸应变 Tensile strain 2 |
|||
屈服 yield |
4.5 | % | |
断裂 fracture |
% | ||
弯曲模量 Bending modulus 3 |
MPa | ASTM D790 | |
弯曲强度 bending strength 3 |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
备注 |
---|
2. 50 mm/min |
3. 2.8 mm/min |
【新闻资讯】查看全部
如何降低车用聚丙烯树脂的VOC?
2017-06-26 目前,汽车内饰空气质量成为了主机厂最关心的问题之一。为加强乘用车内空气质量控制,环保部科技标准司2014年下发《乘用车内空气质量评价指南》(修订GB//T26730-2011),修订版指南由推荐级别升级为强制级别,意味着今后所有的车企将提升生产标准,自2017年1月1日起,所有新定型的销售车辆必须满足标准要求,而对于此前已经定型的车辆,则自2018年7月1日开始严格执行。本次标准修订,原有八项监控物质不变,并修订了车内空气质量污染限值。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |