牌号简介 About |
---|
PMMA嵌段共聚物超柔性。 PMMA block copolymer superflexible. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.11 | g/cm³ | ISO 1183/A |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
31 | g/10min | ISO 1133 |
收缩率 Shrinkage rate |
|||
TD TD |
1.0 到 1.5 | % | |
MD MD |
1.0 到 1.5 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
无断裂 | ISO 180/1A | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
ISO 180/1U | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
B50 B50 |
℃ | ISO 306 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:23~55℃ MD:23~55℃ |
1/℃ | ||
TD:23~55℃ TD:23~55℃ |
1/℃ | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Transmittance |
% | ISO 13468 | |
雾度 Haze |
% | ISO 14782 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A,15 秒 Shore A, 15 seconds |
|||
邵氏 D,15 秒 Shore D, 15 seconds |
|||
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2/5 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2/5 | |
弯曲模量 Bending modulus 2 |
MPa | ISO 178 |
备注 |
---|
2. 2.0 mm/min |
【新闻资讯】查看全部
激进投资者敦促陶氏化学和杜邦修正兼并后的分拆计划
2017-05-26 激进投资者Dan Loeb与陶氏化学公司(Dow Chemical Co., DOW)之间的紧张关系再次回到公众视线。 根据《华尔街日报》(The Wall Street Journal)见到的一份简报,在沈寂一年后,Loeb计划公开推动陶氏化学公司和杜邦公司(DuPont Co., DD)修改其复杂的合并和分拆计划。 这两家化学巨头于2015年底宣布了大规模合并交易,称将短暂合并双方庞大的业务,随后将合并后公司分拆成三家上市公司,分别专注于农业、材料和特种 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |