牌号简介 About |
---|
polifil gfpcc-ws系列化合物是用化学耦合玻璃纤维增强的水安全型均聚聚丙烯,通过NSF/ANSI标准61认证,满足美国和加拿大对饮用水系统组件的监管要求。与传统玻璃纤维增强聚丙烯相比,这些化合物具有优越的强度和刚度、改进的高温性能、更好的抗蠕变、更高的冲击强度和更高的耐高温水性。这些化合物用于耐化学性应用、电器、电气部件、汽车、灌溉、公用事业、过滤系统和饮用水产品。适用标准加工技术。使用此信息作为指南,帮助您选择适合您应用的树脂。 Polifil ® GFPPCC-WS series compounds are Water Safe Homopolymer polypropylenes reinforced with chemically coupled glass fibers and are certified to NSF/ANSI Standard 61 and meet the regulatory requirements of the U.S. and Canada for Drinking Water System Components. These compounds offer superior strength and stiffness, improved elevated temperature performance, better creep resistance, higher impact strength and higher resistance to high temperature water than conventional glass fiber reinforced polypropylenes. These compounds are used in chemical resistance applications, appliances, electrical components, automotive, irrigation, utility, filter systems, and potable water products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.978 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
5.0 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD:2.49 mm MD:2.49 mm |
0.60 | % | |
TD:2.49 mm TD:2.49 mm |
1.1 | % | |
吸水率 Water absorption rate |
|||
24hr 24hr |
0.030 | % | ASTM D570 |
灰份含量 Ash Content |
% | ASTM D2584 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
正切,23℃ Tangent, 23 ℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
广西梧州年产15万吨PET塑料加工项目或年底投产
2016-11-14 据了解,位于广西梧州进口再生资源加工园区的年产15万吨PET塑料加工项目生产车间里呈现出一片繁忙景象,整套意大利进口的设备已全部进场,工作人员在外国技术人员的指导下,正进行破碎机、人工分选运输、料仓等设备安装。目前,该项目在抓紧进行PET清洗生产线设备安装的同时,全力加快其他配套设施建设,以实现年底建成并投产的目标。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |