牌号简介 About |
---|
Selenis-Akolyt Kb311共聚酯是专门为印刷工艺薄膜挤出而开发的。使用Selenis Akolyt KB 311制作的胶片具有出色的装饰性能,允许您的客户无限的设计自由和最终应用的完全个性化。使用Selenis Akolyt KB 311制作的胶片具有极高的清晰度,可实现反向打印技术,增强打印光学性能,同时最大限度地保护艺术品。使用Selenis Akolyt KB 311生产的薄膜的延伸率允许热成形深拉伸,同时其相对较低的热重可以节省能源成本,同时保证与自身的完美粘合。经证明,对普通家用清洁剂的耐化学性使Selenis Akolyt KB 311成为薄膜的完美选择,可以抵抗日常风化。 Selenis Akolyt KB 311 copolyester has been specifically developed for the extrusion of technical films for graphic arts in general. Films made with Selenis Akolyt KB 311 allow excellent decorative capability, permitting your customers unlimited design freedom and full personalization of the final application. The exceptional clarity of films produced with Selenis Akolyt KB 311 allow reverse printing technique, enhancing printing optics whilst maximizing artwork protection. Elongation of films produced with Selenis Akolyt KB 311 permit thermoformed deep drawing, at the same time as its relatively low Tg grants energy cost savings while guaranteeing perfect adhesion to itself. Proven chemical resistance against common household detergents makes Selenis Akolyt KB 311 the perfect choice for films that will resist everyday weathering. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
> 1.29 | g/cm³ | ASTM D792 |
表观密度 Apparent density |
0.73 | g/cm³ | |
固有粘度 Intrinsic viscosity |
0.78 到 0.82 | dl/g | ISO 1628-5 |
Color b Color b |
< 1.00 | ASTM D6290 | |
Color L Color L |
> 64.0 | ASTM D6290 | |
Particle Shape Particle Shape |
|||
颗粒大小 Particle size |
mg/20 chips | ||
湿度 humidity |
% | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
℃ | ASTM D3418 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
注塑模具设计时关于流道的着重点
2018-03-05 1、进胶口应开设在产品肉厚部分,保证充模顺利和完全; 2、尽量开设在不影响产品外观和功能处,可在边缘或底部处; 3、在浇口附近之冷料穴,尽端常设置拉料杆,以利于浇道脱模; 4、大型或扁平产品,建议采用多点进浇,可防止产品翘曲变形和缺料; 5、其位置应选在使塑料充模流程最短处,以减少压力损失,有利于模具排气; 6、在细长型芯附近避免开设浇口,以免料流直接冲击型芯, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |