牌号简介 About |
---|
我们的TPV-Euroter产品是硫化热塑性材料,具有与硫化橡胶和塑化聚氯乙烯相似的特性,具有良好的柔韧性和可加工性,低压缩永久变形。这些产品可以使用标准热塑性设备进行加工,可以像普通热塑性产品一样进行精加工、挤压、成膜和热成型。废物可以完全再处理,具有相当的效率和环境可持续性优势。与传统硫化橡胶(Thermo-set)相比,Euroter具有优异的光、臭氧和紫外线稳定性。基于这些特性,我们的产品可以广泛应用。Euroter的主要性能:非常好的耐高温和低温,从T35°C到-60°C,以及耐油和油脂,使制造的产品具有较长的使用寿命;高耐磨性和低摩擦系数;良好的机械特性,高抗撕裂和疲劳性,优异的耐酸性,基础和水溶液;广泛的产品范围从35邵尔A到60邵尔D,适用于大量的应用,甚至与传统硫化橡胶复杂和难做;优良的臭氧,紫外线和暴露在光后的抗老化性。 Our TPV-EUROTER products are vulcanised thermoplastic materials, having similar characteristics of vulcanised rubber as well as to plasticized PVC, with good flexibility and processability properties, low compression set. These products can be processed using standard thermoplastic equipment and can be iniected, extruded, filmed and thermoformed iust like normal thermoplastic products. Waste can be fully reprocessed with considerable efficiency and environmental sustainability advantages. EUROTER exhibit excellent light, ozone and UV stability compared to traditional vulcanised rubbers (thermo-set). Based on these properties, our products can be used in a wide range of applications. The main EUROTER properties: very good resistance to high and low temperatures, from T35 °C to -60°C, and to oils and grease, giving manufactured products a long lifespan; high abrasion resistance and a low friction coefficient; good mechanical characteristics, high resistance to tearing and fatigue, excellent resistance to many acids, based and aqueous solutions; wide range of products from 35 Shore A to 60 Shore D, for a vast number of applications, even complex and difficult to do with traditional vulcanised rubbers; excellent ozone, UV and age resistance after exposure to light. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.918 到 0.958 | g/cm³ | DIN 53479 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness 2 |
|||
邵氏 A Shaw's A 2 |
82 到 88 | ISO 868 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
断裂 fracture |
9.00 到 11.0 | MPa | ISO 37 |
100% 应变 100% strain |
3.50 到 4.50 | MPa | ISO 37 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
550 到 750 | % | ISO 37 |
撕裂强度 tear strength |
kN/m | DIN 53515 | |
压缩形变 Compression deformation |
% | ISO 815 |
备注 |
---|
2. 15 |
【新闻资讯】查看全部
聚烯烃套利时机再现
2017-01-06 在2016年“十一”假期后,由于上游库存低位、下游集中补库需求以及商品共振,聚烯烃开启了一波凌厉的上涨行情,12月中旬达到年内高点后开始回落。相比较而言,PP供需面后市将明显弱于LL,由于四季度PP需求超预期,两者价差在12月中旬一度缩小到500元左右的年内低点,目前聚烯烃价差逐渐回升,后市LL/PP价差将继续扩大。 首先,PP投产压力明显大于LL。产能投放方面,2017年PE预计新增产能182万吨,由于明年3月中天合创投产的是高压,而最新消息显示宁煤可能推迟到7月,明年上 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |