牌号简介 About |
---|
邻苯二甲酸酯是API V类流体。这些芳香酯的挥发性比矿物油低,是需要良好低温和密封膨胀性能或提高添加剂溶解性的应用的最佳选择。邻苯二甲酸酯既可作为唯一的合成基液,也可作为汽车和工业润滑油应用中的添加剂,如发动机油、压缩机油和润滑脂。 SynPrime™ Phthalate Esters are API category Group V fluids. These aromatic esters offer lower volatility than mineral oils and are an excellent choice for applications which require good low-temperature and seal-swell properties or enhanced additive solubility. SynPrime™ Phthalate Esters can be used either as sole synthetic basefluids or additives in automotive and industrial lubricant applications such as engine oils, compressor oils and greases. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 2 |
0.956 到 0.962 | g/cm³ | ASTM D4052 |
Viscosity Index Viscosity Index |
41.0 | ASTM D2240 | |
含水量 water content |
|||
最大值 Maximum value |
1000 | ppm | ASTM D6304 |
酸值 acid value |
|||
最大值 Maximum value |
< 0.10 | mg KOH/g | ASTM D974 |
外观 exterior |
清洁,干净 | ASTM D2090 | |
颜色 colour 3 |
ASTM D1209 | ||
粘度 - Kinematic Viscosity - Kinematic |
|||
40℃ 40℃ |
cSt | ||
100℃ 100℃ |
cSt | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
浇铸点 Casting point |
℃ | ASTM D97 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
燃点 Ignition point |
℃ | ASTM D92 | |
闪点 flash point |
℃ | ASTM D92 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
折射率 Refractive index |
|||
25℃ 25℃ |
ASTM D1218 |
备注 |
---|
2. 25/25°C |
3. Pt-Co 等级,最大值 |
【新闻资讯】查看全部
拓斯达:估计往年注塑板块业务增速40%
2017-08-10 受益于注塑行业的整体复苏,拓斯达传统注塑机辅机业务有望迎来高增长。据统计,2016年拓斯达注塑板块实现营收1.85亿元人民币(下同),同比增长15.85%,占总营收的42.72%。 受益于整个中游复苏的影响,去年三季度注塑机行业迎来拐点;注塑机辅机设备及系统作为注塑机的周边设备,有望受益于整个注塑行业的复苏,预计今年拓斯达注塑板块增速40%左右。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |