牌号简介 About |
---|
Vydyne® R550H NT662是通用的,热稳定,抗水解,50%玻璃纤维增强PA66树脂。天然的,它是专门设计的,以最大限度地保留物理性质时,暴露在抗冻溶液在高温下。该产品也经过润滑以改善流动性,并提供优越的表面外观。与未增强的PA66相比,玻璃增强的Vydyne树脂具有更高的热变形温度、抗蠕变和更好的尺寸稳定性。这些产品对包括汽油、液压油和大多数溶剂在内的各种化学品具有良好的耐化学性。Vydyne® R550H NT662是热稳定的,以最大限度地减少聚合物在使用中暴露于高温下的氧化降解。本产品在长期高温下可提高物理性能的保持力。此外,Vydyne® R550H NT662还具有优异的编织线强度和抗疲劳性能,这对于使用防冻液进行循环测试至关重要。典型应用/最终用途:Vydyne® R550H NT662成功应用于各种注塑工程应用。典型零件包括汽车夹子、散热器端水箱和空调和燃油分配系统的零件;电气连接器、外壳和线轴;以及工业应用,如齿轮、轴承壳、盖和外壳。 Vydyne R550H NT662 is general-purpose, heat-stabilized, hydrolysis-resistant, 50% glass-fiber reinforced PA66 resin. Available in natural, it is specifically designed to maximize the retention of physical properties when exposed to anti-freeze solutions at elevated temperatures. This product is also lubricated for improved flow and offers superior surface appearance. Glass-reinforced Vydyne resins provide higher heat distortion temperature, resistance to creep and better dimensional stability when compared with unreinforced PA66. These products have good chemical resistance to a broad range of chemicals including gasoline, hydraulic fluids and most solvents. Vydyne R550H NT662 is heat-stabilized to minimize oxidative degradation of the polymer when exposed to elevated temperatures in service. This product provides improved retention of physical properties under exposure to long term heat. Also, Vydyne R550H NT662 has excellent knit-line strength and fatigue resistance, which is essential for cycle testing with anti-freeze solutions. Typical Applications/End Uses: Vydyne R550H NT662 is successfully used in a wide range of injection-molding engineering applications. Typical parts include automotive clips, radiator endtanks and parts of the air-conditioning and fuel distribution systems; electrical connectors, housings and bobbins; and industrial applications such as gears, bearing shells, covers and housings. |
产品描述 Product Description
厂家:美国奥升德 Ascend
类别:PA66 PA66
用途:动力/其它工具;齿轮;外壳;汽车的发动机罩下的零件;
颜色:自然色
加工条件:注射成型 Injection Molding
性能特点: 防火阻燃等级HB; 机械强度好; 热稳定性好; 含脱模剂; 润滑性; 易流动; Good Rigidity,Good liquidity,Good stripping performance,Lubricating,Heat Stabilized,HB
填料:玻璃纤维 50
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.58 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
ISO 294-4 | ||
TD:23℃,2.0 mm TD:23℃,2.0 mm |
0.90 | % | ISO 294-4 |
MD:23℃,2.0 mm MD:23℃,2.0 mm |
0.40 | % | ISO 294-4 |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
1.2 | % | ISO 62 |
23℃,24hr 23℃,24hr |
0.50 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ISO 178 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ISO 178 | |
泊松比 Poisson's ratio |
ISO 527-2 | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-30℃ -30℃ |
kJ/m² | ISO 179/1eA | |
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179/1eU | ||
-30℃ -30℃ |
kJ/m² | ISO 179/1eU | |
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180 | ||
-30℃ -30℃ |
kJ/m² | ISO 180 | |
23℃ 23℃ |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
TD:23~55℃,2 mm TD:23~55℃,2 mm |
1/℃ | ISO 11359-2 | |
MD:23~55℃,2 mm MD:23~55℃,2 mm |
1/℃ | ISO 11359-2 | |
相对温度指数 Relative temperature index |
|||
电气性能 Electrical performance |
UL 746 | ||
0.75 mm 0.75 mm |
℃ | UL 746 | |
1.5 mm 1.5 mm |
℃ | UL 746 | |
3.0 mm 3.0 mm |
℃ | UL 746 | |
强度机械性能 Strength mechanical performance |
UL 746 | ||
0.75 mm 0.75 mm |
℃ | UL 746 | |
1.5 mm 1.5 mm |
℃ | UL 746 | |
3.0 mm 3.0 mm |
℃ | UL 746 | |
冲击机械性能 Impact mechanical performance |
UL 746 | ||
0.75 mm 0.75 mm |
℃ | UL 746 | |
1.5 mm 1.5 mm |
℃ | UL 746 | |
3.0 mm 3.0 mm |
℃ | UL 746 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
|||
0.75 mm 0.75 mm |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength |
|||
1 mm 1 mm |
kV/mm | IEC 60243 | |
耐电弧性 Arc resistance |
|||
3.0 mm 3.0 mm |
ASTM D495 | ||
相比漏电起痕指数 Compared to the leakage tracing index |
|||
3.00 mm 3.00 mm |
V | IEC 60112 | |
高电弧燃烧指数(HAI) High Arc Burning Index (HAI) |
UL 746 | ||
0.75 mm 0.75 mm |
UL 746 | ||
1.5 mm 1.5 mm |
UL 746 | ||
3.0 mm 3.0 mm |
UL 746 | ||
高电压电弧起痕速率 High voltage arc marking rate |
|||
HVTR HVTR |
UL 746 | ||
热丝引燃 Hot wire ignition |
|||
HWI HWI |
UL 746 | ||
0.75 mm 0.75 mm |
UL 746 | ||
1.5 mm 1.5 mm |
UL 746 | ||
3.0 mm 3.0 mm |
UL 746 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
0.75 mm 0.75 mm |
UL 94 | ||
1.50 mm 1.50 mm |
UL 94 | ||
3.00 mm 3.00 mm |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index |
IEC 60695-2-12 | ||
0.75 mm 0.75 mm |
℃ | IEC 60695-2-12 | |
1.5 mm 1.5 mm |
℃ | IEC 60695-2-12 | |
3.0 mm 3.0 mm |
℃ | IEC 60695-2-12 | |
灼热丝起燃温度 Igniting temperature of the hot wire |
IEC 60695-2-13 | ||
0.75 mm 0.75 mm |
℃ | IEC 60695-2-13 | |
1.5 mm 1.5 mm |
℃ | IEC 60695-2-13 | |
3 mm 3 mm |
℃ | IEC 60695-2-13 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
汽车材料 Automotive materials |
|||
thickness d = 1mm thickness d = 1mm |
FMVSS 302 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
《酸碱罐区设计规范》编制工作启动会在天辰公司召开
2021-06-18 搜料网资讯: 6月10日,中国石油和化学工业联合会团体标准《酸碱罐区设计规范》编制工作启动会在天辰公司召开。该规范由天辰公司主编,启动会邀请了赛鼎工程有限公司、东华工程 |
《酸碱罐区设计规范》编制工作启动会在天辰公司召开 搜料网资讯:6月10日,中国石油和化学工业联合会团体标准《酸碱罐区设计规范》编制工作启动会在天辰公司召开。该规范由天辰公司主编,启动会邀请了赛鼎工程有限公司、东华工程科技股份有限公司等参编单位的4名专家参会。
天辰公司技术发展部部长发表致辞,对各位专家的到来表示热烈欢迎,同时指出: 国内尚无针对酸碱罐区设计的规范,借助此次规范的编制,可以填补国内酸碱罐区设计的空白,使设计有规范可依。 天辰公司对规范编制工作予以高度重视和大力支持,将做好各个环节的管理和协调工作,希望大家齐心协力编制出具有技术先进性和广泛适用性的标准。 会上,此项标准的主要编制人对标准编制的背景、研究方案、初拟提纲及该规范拟解决的技术问题作专题报告。与会专家共同讨论了规范的适用范围、主要章节内容及重点技术问题,确定了编制原则、规范架构、工作分工及下一步工作重点和进度安排。 近年来,发展团体标准是标准化改革的重要内容,国家标准委、工信部等相关部门均以不同形式支持高水平、先进性团体标准的研究制定,为团体标准营造了良好的发展环境。天辰公司抓住发展契机,充分发挥技术创新的能力优势,积极参与行业团体标准编制工作,为石油化工行业开拓新的标准领域、争取行业话语权贡献力量。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |
价格走势图
开始时间:
结束时间:
材料厂家:
【牌号齐全,内容全面】
全网共2500+项牌号+上游原料单体+原油价格,最长可追溯近20年价格行情
【精准,及时,权威!】
专业团队挖掘行情信息,第一时间发布行情
抱歉!该牌号暂无认证数据。
免责声明:参考价格是搜料网根据网络大数据拟合分析的结果,仅供参考。实际成交价取决但不限于以下因素:下单时间,付款方式,交货方式,数量,税费,色号,产地,项目信息。
抱歉!暂无数据。
抱歉!暂无数据。