牌号简介 About |
---|
ISPLEN® PB 170 G2M是一种中高流动性的异相共聚物,具有良好的平衡性能。它的分子结构决定了低粘度和非常好的流动性,允许在复杂或大型模具中填充较长的流动路径,从而获得较短的循环时间和冲击强度和高刚度的良好平衡,从而允许制造具有良好机械阻力的薄壁制品。典型应用——ISPLEN® PB 170 G2M的特殊特性提供了一种多用途等级,用于除具有良好加工性外,还具有高机械性能的应用:家用和休闲家具。家用电器的方形盒和圆形储存容器。盖子、盖子和封口。工业部件:玩具,运动,休闲,汽车,存储组织者,包装…推荐的熔化温度范围为190至250°C。应优化每个生产线的加工条件。 ISPLEN® PB 170 G2M is a medium-high fluidity heterophasic copolymer characterised by its good balance of properties. Its molecular structure determines low viscosity and very good flow that permits to fill complex or large moulds with long flow paths obtaining short cycle times and an excellent balance of impact strength and high stiffness to allow the manufacturing of thin-walled articles with good mechanical resistance. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 170 G2M offer a multi-purpose grade intended for use in applications in which high mechanical properties are appreciated in addition with good processability: Domestic and leisure furniture. Square boxes and round storage containers for consumer appliances. Lids, caps and closures. Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.905 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
12 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
62 | ISO 868 | |
弯曲模量 Bending modulus |
1200 | MPa | ISO 178 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
8.0 | kJ/m² | ISO 179 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
CFRP在数控加工中心制造中也参上一脚
2016-01-21 日本机床工业会与新能源・产业技术综合开发机构(NEDO)开始着手设计新一代5轴数控加工中心,该设备有望在今年采用碳纤维强化塑料(CFRP)制零部件。 5轴数控加工中心也有望采 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |