牌号简介 About |
---|
Durethan® DP 1803/10 H3.0 000000 含有50%的玻璃/矿物增强的PA 6材料,用注射成型的方式进行加工,含有无卤阻燃剂。 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
收缩率 Shrinkage rate |
ISO 2577 | ||
TD:150x105x3,4hrs TD:150x105x3,4hrs |
0.50 | % | ISO 2577 |
MD:150x105x3,4 hrs MD:150x105x3,4 hrs |
0.50 | % | ISO 2577 |
熔体流动 Melt Flow |
|||
260℃,5kg 260℃,5kg |
9.0 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
球压硬度 Ball hardness |
194 | MPa | ISO 2039-1 |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
8500 | MPa | ISO 527-1-2 |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ISO 527-1-2 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 527-2/5 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ISO 178-A | |
弯曲强度 bending strength |
ISO 178/A | ||
屈服,23℃ Yield, 23 ℃ |
MPa | ISO 178-A | |
断裂,23℃ Fracture, 23 ℃ |
% | ISO 178/A | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 180/1U | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
-30℃ -30℃ |
kJ/m² | ISO 180-1A | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
kJ/m² | ISO 180/1U | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相比漏电起痕指数 Compared to the leakage tracing index |
|||
解决方案 A Solution A |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
0.75 mm 0.75 mm |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index |
|||
3.0 mm 3.0 mm |
℃ | IEC 60695-2-12 | |
灼热丝起燃温度 Igniting temperature of the hot wire |
|||
3 mm 3 mm |
℃ | IEC 60695-2-13 | |
极限氧指数 Extreme oxygen index |
% | ISO 4589-2 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-1/2 | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-1/2 | |
熔融温度 Melting temperature |
|||
10℃ / min 10℃ / min |
℃ | ISO 11357-3/-1 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
TD:23~55℃ TD:23~55℃ |
1/℃ | ISO 11359-1/-2 | |
MD:23~55℃ MD:23~55℃ |
1/℃ | ISO 11359-1/-2 | |
溶体温度 Solution temperature |
℃ | ||
模具温度 Mold temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
龙华薄膜2500mm偏光片PMMA基膜量产供货
2021-05-11 搜料网资讯: 5月8日,龙华薄膜发布消息称,公司于5月6日收到下游重要偏光片客户正式启动供货的通知:龙华薄膜超大宽幅PMMA偏光片基膜完全通过了该客户的验证,产线正式量产供货 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |