牌号简介 About |
---|
共聚聚丙烯消费后树脂注射成型特性好,耐冲击。可提供混合颜色。符合FDA NOL的食品级PP,适用于制造一次性食品服务项目,如一次性餐具、汤容器和冷热饮料杯,以及制造可重复使用的板条箱或托盘,用于在室温下存放大量新鲜、未包装的产品和带壳鸡蛋,并且低(使用条件C-G)含量高达100%。 Copolymer Polypropylene Post-Consumer Resin Injection Molding CHARACTERISTICS Good impact resistance. Available as mixed color. Food grade PP, in compliance with FDA NOL suitable for use in the fabrication of disposable food service items, such as disposable cutlery, soup containers, and hot and cold drink cups and the manufacture of reusable crates or pallets for holding relatively large quantities of fresh, unwrapped product and shelled eggs under room temperature and below (Conditions of Use C-G) in levels up to 100% content. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.915 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
10 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
21.4 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
屈服 yield |
10 | % | ASTM D638 |
弯曲模量 Bending modulus |
1030 | MPa | ASTM D790 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
伊士曼合作开发可持续汽车材料
2020-11-19 搜料网资讯: 伊士曼和总部位于意大利都灵的国际领先塑料配方制造商和化合物生产商Gruppo Maip宣布合作,旨在为汽车内饰应用开发新的可持续聚合物解决方案。这将创造一个以伊斯曼 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |