牌号简介 About |
---|
产品说明Lucolast® 7010是一种极性共聚物,由乙烯和丙烯酸丁酯组成,结晶度低。产品特性沥青中添加Lucolast® 7010可增加其粘度并扩大塑性范围。尽管Lucolast® 7010的FRAAS断裂点的最小值与未改性标准沥青一样低,但环和球软化点会显著增加,这取决于添加的Lucolast® 7010的比例。渗透值相应地下降。根据DIN EN 12591确定的延展性降低,但是,在低温下确定的所谓延展性值通常比不添加Lucolast® 7010的标准沥青更有利。与其他标准粘合剂Lucolast® 7010相比,产品的优点在提高抗变形性方面显示出显著的优势。高温下的车辙形成试验表明,添加Lucolast® 7010对沥青进行热塑性改性或改变粘结料粘度时,沥青能承受2-3倍的荷载。这不会损害Lucolast® 7010的低温性能,而是改善它。即使是相对少量的基于Lucolast® 7010的PMB在沥青混合料中的应用也能提高:抗机械应力,特别是抗变形和磨损稳定性/刚度,并降低热负荷和低负荷时的流动趋势低温柔性老化行为应用实例:S-Weaking Courses to ZTV沥青-S在165°C至195°C的温度范围内,用Lucolast® 7010将Tb浇注的沥青均匀地混合到PMB沥青中,也可在斜坡表面(坡道)上使用石胶泥沥青特殊沥青表面,例如多孔沥青薄沥青磨耗层(热铺),然后准备使用。根据混合强度的不同,大量(约20 t)混合所需的时间为1-3 h。使用高速剪切混合装置会产生更高的混合量。为了避免可能的相分离,需要连续混合过程。环境兼容性Lucolast® 7010在制造和加工过程中对环境无害,不含增塑剂和氯,对健康、水、土壤或植物无害。包装颗粒:25公斤袋装,阴凉干燥,避免阳光直射。其他储存条件会影响产品和包装的质量。建议2年内使用。 Product description Lucolast 7010 is a polar copolymer consisting of ethylene and butyl acrylate with low crystallinity. Product properties Addition of Lucolast 7010 to bitumen increases its viscosity and broadens the range of plasticity. Although the minimum value of the Fraass breaking point of Lucolast 7010 is as low as for unmodified standard bitumen, the ring and ball softening point increases considerably, depending on the proportion of Lucolast 7010 that was added. Penetration values decline accordingly. Ductility determined according to DIN EN 12591 decreases, however, the values ascertained for the so-called ductility at low temperatures are usually more favourable than those for standard bitumen without addition of Lucolast 7010. Product advantages Compared with other standard binder Lucolast 7010 displays significant advantages in improving resistance to deformation. Rut formation tests at high temperatures demonstrated that asphalt can bear a two- to three-fold load when modifying it with thermoplastics or altering binder viscosity by adding Lucolast 7010. This does not impair the low-temperature performance of Lucolast 7010, but rather improves it. Applications Even relatively small amounts of PmB based on Lucolast 7010 in asphalt mixtures improve: resistance to mechanical stress, in particular deformation and wear stability / rigidity and reduce the tendency to flow when hot and under load low temperature flexibility ageing behaviour Examples for application: s-wearing courses to ZTV-Asphalt - StB poured asphalt, also on sloping surfaces (ramps) stone mastic asphalt special asphalt surfaces, e.g. porous asphalt thin bituminous wearing courses (hot laying) |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 2 |
0.924 | g/cm³ | |
-- -- 3 |
1.00 到 1.10 | g/cm³ | |
表观密度 Apparent density |
0.50 | g/cm³ | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
860 | % | |
弹性模量 Elastic modulus |
62.0 | MPa | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
软化温度 Softening temperature 4 |
|||
R&B R&B 4 |
℃ | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Ductility Ductility 4 |
mm | ||
Embrittlement Range Embrittlement Range |
℃ | ||
FraaB Breaking Point(25℃) FraaB Breaking Point(25℃) 4 |
℃ | ||
渗透深度 Penetration depth 4 |
cm | ||
软化范围 Softening range |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 23°C |
3 23°C; Mixture of Bitumen B50/70 and 2,4%; Lucolast 7010-Bitumen |
4 Mixture of Bitumen B50/70 and 2,4%; Lucolast 7010-Bitumen |
【新闻资讯】查看全部
中韩石化成功实现环氧乙烷管输下游企业
2021-01-26 搜料网资讯: 1月20日16时,随着环氧乙烷全程无泄漏输送至武汉化工区下游企业奥克化学公司,标志着中韩石化环氧乙烷管输项目一次投用成功。 当前,环氧乙烷市场边际效益最佳,增 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |