牌号简介 About |
---|
PEEK 15%玻璃纤维增强,低粘度,UL 94V0,无卤素和红磷。 PEEK 15% glass fiber reinforced, low viscosity, UL 94 V0, halogen and red phosphorus free. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.38 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
ASTM D955 | ||
MD MD |
0.40 | % | ASTM D955 |
TD TD |
0.80 | % | ASTM D955 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
7000 | MPa | ASTM D638 |
拉伸强度 tensile strength |
|||
屈服 yield |
120 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
kJ/m² | ISO 180/A | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648-A | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 2 | |
相对温度指数 Relative temperature index |
℃ | UL 746 | |
电气性能 Electrical performance |
℃ | UL 746 | |
冲击机械性能 Impact mechanical performance |
℃ | UL 746 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
1.60 mm 1.60 mm |
UL 94 | ||
3.20 mm 3.20 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 载荷2 (50N) |
【新闻资讯】查看全部
学习废水处理技术辞别水净化 提高废塑料再生企业形象
2017-10-12 由于废塑料回收再生行业的二次污染问题,国内已经有大批的中小型企业被环保部勒令关停,其中水污染对环境的影响十分恶劣。废塑料回收再生过程中的清洗环节是主要的污染源。水污染对环境及对人们的生活造成的危害触目惊心。所以,在废塑料回收再生过程中必须对水进行处理,以消除污水对环境的影响。 1、废塑料清洗所使用的清洗介质 清洗介质是指清洗时与被清洗表面接触,并与被清洗表面作用而产生清洗力的物质。清洗介质种类繁多,使用在废塑料清洗方面的清洗 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |