牌号简介 About |
---|
Quadrant EPP CESTILENE HD 500R是一种高分子量聚乙烯产品,。 它,在欧洲有供货。 特性包括: 阻燃/额定火焰 环保/绿色 |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.960 | g/cm³ | ISO 1183 |
吸水率 Water absorption rate |
|||
饱和,23℃,1.00 mm Saturation, 23 ℃, 1.00 mm |
0.010 | % | ISO 62 |
分子量 molecular weight |
500000 | g/mol | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
-- -- 2 |
> 20 | kJ/m² | 内部方法 |
局部断裂 Local fracture |
85 | kJ/m² | ISO 179/1eA |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179/1eU | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
连续使用温度 Continuous use temperature |
|||
-- -- 3 |
℃ | ||
-- -- 4 |
℃ | ||
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/B | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:23~100℃ MD:23~100℃ |
1/℃ | ||
导热系数 Thermal conductivity coefficient |
|||
23℃ 23℃ |
W/m/K | ||
使用温度 Operating temperature |
|||
minimum minimum |
℃ | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.60 mm 1.60 mm |
UL 94 | ||
极限氧指数 Extreme oxygen index |
% | ISO 4589-2 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Relative Weight Loss Relative Weight Loss |
内部方法 | ||
-- -- 5 |
内部方法 | ||
-- -- 6 |
内部方法 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ISO 868 | ||
邵氏 D,3 秒 Shore D, 3 seconds |
ISO 868 | ||
邵氏 D,15 秒 Shore D, 15 seconds |
ISO 868 | ||
球压硬度 Ball hardness |
MPa | ISO 2039-1 | |
拉伸模量 Tensile modulus |
MPa | ISO 527-2/1B/1 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2/1B/50 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ISO 527-2/1B/50 | |
标称拉伸断裂应变 Nominal tensile fracture strain |
% | ISO 527-2/1B/50 | |
压缩强度 compressive strength |
ISO 604/1 | ||
1% 应变 1% strain |
MPa | ISO 604/1 | |
2% 应变 2% strain |
MPa | ISO 604/1 | |
5% 应变 5% strain |
MPa | ISO 604/1 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Double 15° notch, DIS 11542-2 |
3 20000 hrs |
4 Short periods |
5 Wear test in sand/water slurry |
6 Wear test on plastics pin on rotating steel disk-tribo system |
【新闻资讯】查看全部
受新料下跌影响,新旧料价差增加,部分价格小幅下跌
2018-05-22 上周再生PVC市场整体平稳,其中多数硬质料毛料难寻,货少价扬,但受新料下跌影响,新旧料价差缩小,部分价格小幅下跌。由于毛料缺乏,多数再生厂家生产开工灵活,随产随出,碎料及颗粒货源破紧俏,厂家库存有限;厂家精力转向寻找毛料资源,由于环保原因,今年一季度许多工地暂无施工,因此硬质毛料寻找相对困难。需求面稳定,多数终端厂家随用随采,场内小单交易为主多数料成交尚可。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |