牌号简介 About |
---|
本产品为聚氨酯浇注系统。使用前请仔细搅拌和摇晃。由于原料不同,产品的颜色可能会有所不同。这些不会影响产品的质量和性能。如果铸造厚度大于4毫米,系统SG 198容易变得油腻,这意味着表面可能存在油膜。应用原型和短程设计原型和短程工业玩具装饰材料旋转铸造工艺性能高冲击强度很好铸造低粘度短固化时间 This product is a polyurethane-casting system. Stir up and shake carefully before use. The product can be subject to variations in colour due to the raw materials. These do not affect the quality and properties of the product. The system SG 198 tends to get oily if casted in thicknesses >4mm, that means that there might be an oil-film on the surface. Applications Prototypes and short runs design Prototypes and short runs industry Toys Decoration stuff Swivel-cast procdure Properties high impact strength very well castable low viscosity short curing time |
技术参数 Technical Data | |||
---|---|---|---|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
42 到 58 | kJ/m² | ISO 179 |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
20℃ 20℃ |
1.08 到 1.12 | g/cm³ | |
粘度 viscosity |
|||
25℃ 25℃ |
0.035 到 0.045 | Pa·s | |
固化时间 Curing time |
|||
20℃ 20℃ |
0.25 到 0.50 | hr | |
储存稳定性 storage stability 2 |
|||
20 ℃ 20 ℃ 2 |
2.0 到 3.5 | min | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 7619 | ||
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
压缩强度 compressive strength |
MPa | ISO 604 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 200 g |
【新闻资讯】查看全部
万华化学宁波工厂MDI二期装置复产
2021-01-16 搜料网资讯: 2021年1月12日,万华化学发布公告称,根据公司于2020年11月24日发布的万华化学集团股份有限公司宁波工厂MDI二期装置例行停产检修公告,公司全资子公司万华化学(宁波)有 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |