牌号简介 About |
---|
任务9配色是一种高性能聚氨酯铸造树脂,具有很高的抗压强度和拉伸强度。任务9是清晰的琥珀色,这使得这种塑料很容易着色使用如此强烈或点燃着色剂。以体积计,混合比为1a:1b,任务9易于使用,低混合粘度(300 cps)确保气泡截留最小。使用寿命为7分钟,固化时间约为60分钟(取决于质量)。任务9非常适合制作抗冲击工具、颜色精确的原型/模型以及耐用的复制品。 TASK® 9 Colormatch is a high performance urethane casting resin that features very high compressive strength and tensile strength. TASK® 9 is clear amber, which makes this plastic very easy to color using SO-Strong® or IGNITE® colorants. With a mix ratio of 1A:1B by volume, TASK® 9 is easy to use and a low mixed viscosity (300 cps) ensures minimal bubble entrapment. Pot life is 7 minutes and cure time is about 60 minutes (depending on mass). TASK® 9 is ideal for making impact resistant tooling, color accurate prototypes / models as well as durable reproductions. This resin is designed for casting in thicknesses up to 1/2" (1.27 cm). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.14 | g/cm³ | ASTM D1475 |
特定体积 Specific volume |
0.878 | cm³/g | ASTM D1475 |
收缩率 Shrinkage rate |
|||
MD:23℃,168 hrs MD:23℃,168 hrs |
0.90 | % | ASTM D2566 |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脱模时间 stripping time 2 |
|||
23℃ 23℃ 2 |
60 | min | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
混合比 Mixing ratio |
1A:1B by volume | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩模量 Compression modulus |
MPa | ASTM D695 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
储存稳定性 storage stability |
|||
23℃ 23℃ |
min | ASTM D2471 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Cure Time |
【新闻资讯】查看全部
美国乙烯价格坐上过山车,中美竞逐全球乙烯之巅
2021-04-22 搜料网资讯: 裂解装置开工异常,美国乙烯价格如过山车 根据OPIS PetroChem Wire的统计,在冬季风暴乌里(Uri)发生后,美湾的乙烯蒸汽裂解装置开工率降至23%。随着极寒天气影响减缓, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |