牌号简介 About |
---|
TECNOFLON® FOR 5381是一种低粘度 固化含氟弹性体(FKM)三元共聚物,含氟量为68.5%。Tecnoflon® FOR 5381非常适合要求耐化学性能及/或长期耐热性优于含氟弹性体共聚物的产品。 该牌号含专有的固化系统和特种加工助剂,赋予材料卓越的加工性能,加工周期快,焦烧安全性高 。 TECNOFLON® FOR 5381 的一些基本特性为: - 优秀的加工性能 优异的耐化学性 低模压形变 良好的耐热性 Tecnoflon® FOR 5381 可用于模压、注塑和转移模塑成型轴密封件、阀杆密封件、垫片或任何需要优异的耐化学性的产品。 Tecnoflon® FOR 5381 可以与固化系统和其它常规含氟弹性体配混材料混合。混合机械可用双辊研磨机或密炼机。这种材料可以挤塑成软管或型材,也可压延成片材或带材。成品可采用各种橡胶加工方法制备。 TECNOFLON® FOR 5381 is a low viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5% fluorine content. Tecnoflon® FOR 5381 is well suited for all applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers. Tecnoflon® FOR 5381 contains proprietary cure system and special process aid providing superior processability for fast cycles and scorch safety. Some of the basic properties of TECNOFLON® FOR 5381 are: Very good processability Excellent chemical resistance Low compression set Good heat resistance Tecnoflon® FOR 5381 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Tecnoflon® FOR 5381 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
门尼粘度 Mooney viscosity 2 |
|||
ML 1+10,121℃ ML 1+10,121℃ 2 |
21 | MU | |
氟含量 Fluorine content 2 |
69 | % |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 聚合物原料 |
【新闻资讯】查看全部
机器人行业迎来重要窗口期
2021-10-08 搜料网资讯: 机器人正以越来越快的速度渗透到我们的生活中在酒店提供咨询送货服务、在餐厅传送菜肴、在工厂车间搬运货物、在手术室精细操作 中国机械工业联合会执行副会长、中 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |