牌号简介 About |
---|
固化后的增韧结构胶比工程塑料的承重胶具有更高的强度。预期用途:粘合:PVC、玻璃纤维、ABS、FRT、PBT、PPO、PCBB、Metton、Lomod、Valox、Noryl、GTX、Minlon、环氧树脂、边缘聚氨酯、木材、准备不良的表面,以及预计会暴露于室外风化或溶剂的地方。特点:最小表面处理室温固化1:1配合比快速夹具在薄套无流挂配方 Toughened structural adhesive, after curing, produces superior strength to load-bearing bonds to engineered plastics. Intended Use: Bond: PVC, fiberglass, ABS, FRT, PBT, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, epoxy, RIM urethane, wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated. Features: Minimal surface preparation Room temperature cure 1:1 mix ratio Rapid fixture in thin set Non-sagging formula |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
特定体积 Specific volume |
1.02 | cm³/g | |
密度 Density 2 |
0.983 | g/cm³ | |
固体含量 Solid content |
|||
by Volume by Volume |
100 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Impact Resistance Impact Resistance |
46.2 | kJ/m² | |
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
工作时间 working hours |
|||
22℃ 22℃ |
4.0 到 6.0 | min | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸剪切强度 Tensile shear strength |
ASTM D1002 | ||
ABS ABS |
MPa | ASTM D1002 | |
GBS GBS |
MPa | ASTM D1002 | |
Polycarb Polycarb |
MPa | ASTM D1002 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
固化时间 Curing time |
hr | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
使用温度 Operating temperature |
℃ | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Mixed |
【新闻资讯】查看全部
摩擦学ASTM塑料功能机械测试办法
2017-06-21 摩擦学ASTM塑料机械测试 多面体实验室根据ASTM标准进行机械测试,如: 耐磨性用Taber Abraser 塑料薄膜摩擦系数 压缩测试 动态力学分析,从-100到200摄氏度 抗弯强度 硬度(硬度计) 硬度( |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |