牌号简介 About |
---|
LARIPUR® LPR 6518是一种热塑性聚氨酯弹性体(聚酯)(TPU-聚酯)材料,。 该产品在北美洲、拉丁美洲或欧洲有供货,加工方式为:注射成型。 LARIPUR® LPR 6518的主要特性有: 耐候性好 耐化学品 耐磨 附着力强 SERIES 15 AND 18 PLASTICIZED ESTER Products based on saturated polyester and containing a small amount of plasticizer, they have been specially developed to fill a gap between rubber materials and polyurethanes. They combine to give a very soft grade but with polyurethane 's typical features such as good flexibility and abrasion resistance, while maintaining short processing times. This can be particularly applied to the shoe industry where TPUs guarantee excellent adhesion to the two-component PU without applying any primer. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.19 | g/cm³ | DIN 53479 |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
DIN 53504 | ||
断裂 fracture |
30.7 | MPa | DIN 53504 |
50% 应变 50% strain |
1.80 | MPa | DIN 53504 |
100% 应变 100% strain |
2.70 | MPa | DIN 53504 |
300% 应变 300% strain |
5.00 | MPa | DIN 53504 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | DIN 53504 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
DIN 53505 | ||
磨损量 Wear amount |
mm³ | DIN 53516 | |
撕裂阻力 Tear resistance |
MPa | DIN 53515 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
性价比高且效果明显的3D打印牙箍面世
2021-04-10 搜料网资讯: 众所周知,作为学生并没有多少可以支配的收入,但是Amos Dudley作为学生在新泽西理工大学能够获得高端的3D印刷设备,因此,他带着自己的牙齿模具、一些廉价的海藻酸粉 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |