牌号简介 About |
---|
TOTAL POLYSTYRENE 1050是一种冰色,高耐热晶体聚苯乙烯挤出和注射应用设计。该牌号可纯用于生产薄板和透明杯或与其他TOTAL聚苯乙烯稀释。应用:高耐热热成型产品泡沫挤出,光扩散板(LDP) TOTAL POLYSTYRENE 1050 is an ice color, high heat resistant crystal polystyrene designed for both extrusion and injection applications. This grade can be used pure for the production of sheets and transparent cups or in dilution with other TOTAL HIPS. Applications High Heat Resistant Thermoformed Product Foam Extrusion Light Diffuser Plate (LDP) |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.04 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
200℃,5.0kg 200℃,5.0kg |
2.8 | g/10min | ISO 1133 |
螺旋流动长度 Spiral flow length 3 |
42.0 | cm | |
收缩率 Shrinkage rate |
0.40 到 0.70 | % | |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
0.040 | % | ISO 62 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
介电强度 Dielectric strength |
kV/mm | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
L 级 Level L |
ISO 2039-2 | ||
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 熔体温度: 428°F |
【新闻资讯】查看全部
巴陵石化橡胶部绿色生产亮出“绿色名片”
2022-07-21 盛夏时节,巴陵石化橡胶部生产5万吨热塑性橡胶SEBS装置智能立体仓库。新的SEBS产品在可回收的共享托盘中下线后,由AGV(自动引导运输车)转移到仓储输送机,然后由堆垛机将堆叠的 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |