公司信息及水印
| 牌号简介 About |
|---|
| “Hifax EKS 226P”是一种用于注射成型的未填充的紫外线稳定聚丙烯共聚物。它结合了低刚度/良好的冲击性能和良好的流动性。该等级是专门为需要非常好的低温冲击性能的汽车外部零件的成型设计的。该等级有颜色匹配,颗粒形式。 "Hifax EKS 226P" is an unfilled UV stabilised Polypropylene copolymer for injection molding. It combines low stiffness/with excellent impact properties and good flowability. The grade has been specifically designed for molding of automotive exterior parts that requires very good low temperature impact behavior. The grade is available in color-matched, pellet form. |
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.890 | g/cm³ | ISO 1183 |
|
熔体质量流动速率 Melt Flow Rate |
13 | g/10min | ISO 1133 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
拉伸强度 tensile strength |
|||
|
屈服 yield |
14.0 | MPa | ISO 527-2/50 |
|
弯曲模量 Flexural Modulus |
注册或登录后
所有资料免费
|
MPa | ISO 178 |
|
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
悬臂梁缺口冲击强度 Izod Notched Impact strength |
注册或登录后
所有资料免费
|
ISO 180/1A | |
|
-40℃ -40℃ |
注册或登录后
所有资料免费
|
kJ/m² | ISO 180-1A |
|
23℃ 23℃ |
注册或登录后
所有资料免费
|
ISO 180/1A | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 HDT |
注册或登录后
所有资料免费
|
||
|
0.45 MPa,未退火 0.45 MPa, unannealed |
注册或登录后
所有资料免费
|
℃ | ISO 75-2/B |
| 备注 |
|---|
| 1 一般属性:这些不能被视为规格。 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |















支付宝
微信支付