牌号简介 About |
---|
采用Unipol-PP技术,采用高效催化剂体系的气相流化床反应器,制备了具有成核剂和抗静电剂的45熔体流动均聚聚丙烯,用于薄壁注射成型的尖塔聚合物聚丙烯1345Z。本产品适用于薄壁注塑应用,包括封口、食品容器和其他需要高硬度的消费品应用。1345Z产品提供:优良的设置性能、优良的颜色和加工稳定性、低气味和味道、优良的流动特性、高硬度成核和抗静电性。本产品由Pinnacle聚合物公司销售,采用天然、未着色的颗粒形式,符合CFR标题21第177部分B子部分的适当要求。第177.1520(c)1.1a节,标题为《1938年美国食品、药品和化妆品法》1958年食品添加剂修正案中的“烯烃聚合物”。 45 MELT FLOW HOMOPOLYMER POLYPROPYLENE WITH NUCLEATOR AND ANTISTAT FOR THIN WALL INJECTION MOLDING Pinnacle Polymers Polypropylene 1345Z is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for thin-wall injection molded applications including closures, food containers and miscellaneous consumer products applications that require high stiffness. The 1345Z product provides: Superior set-up behavior Excellent color and processing stability Low odor and taste Excellent flow characteristics High stiffness Nucleation and antistat This product, as marketed by Pinnacle Polymers Company, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
45 | g/10min | ASTM D1238 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
39.3 | MPa | ASTM D638 |
拉伸应变 Tensile strain 2 |
|||
屈服,3.20 mm,注塑成型 Yield, 3.20 mm, injection molding 2 |
8.0 | % | ASTM D638 |
弯曲模量 Bending modulus 3 |
|||
1% 正割,3.20 mm,注塑成型 1% cut, 3.20 mm, injection molded 3 |
1930 | MPa | ASTM D790-A |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch 4 |
|||
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 4 |
J/m | ASTM D256 | |
23℃,3.2mm,注塑成型 23 ℃, 3.2mm, injection molding 4 |
kJ/m² | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 类型 1, 2,0 in/min |
3 类型 1, 0,050 in/min |
4 Type I |
【新闻资讯】查看全部
东航飞行事故正式进入理赔期,业内人称全部理赔金额将达数亿元
2022-03-30 东航MU5735航空器飞行事故发生近一周之后,理赔工作正式启动。谁来负责赔付?又该如何赔付? 保险业内人士表示,此次保险公司涉及的赔偿分为飞机财损部分及遇难者的人身赔偿部分 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |